Yaber Jump Starter YR800
10W WIRELESS CHARGER
10W wireless charger function and large 23800mAh battery capacity can provide sufficient power to quick charge your smartphones
MULTI-FUNCTION
Your smart essential tool in an emergency with LCD Screen & compass & Safety Hammer
4 Lighting Modes
This car jump starter power pack can work as an torch with flashlight, strobe, SOS and Warning light
Car jump starter details:
This jump starter is equipped with two USB Output including USB1 (QC3.0 5V 3A / 9V 2A / 12V 1.5A),USB2 (5V 2.4A) and 5V 2A Type C input for charging.
Easy to use
How to start your car?
Step 1. Insert the plug into the jump starter.
Step 2. Connect the clamps to the car battery.
Step 3. Turn it on and start your car.
Step 4. Remove the clemps.
Specifications
USB Output 1: QC 3.0, 5V / 2.4A [MAX 5V3.1A], 9V / 2A(Charge your phone, tablet, camera, etc)
USB Output 2: QC 3.0, 5V / 2.4A [MAX 5V3.1A], 9V / 2A( Charge your phone, tablet, camera, etc)
AC Output: 220V / 50Hz (UK/EU/US/JP/AU), 110V / 60Hz (US/JP),
DC output: 12V / 16V / 19V 10A( Charge the device with DC outlet)
DC INPUT: 15V/1A
DC Power: MAX 10A 105W
AC Outlet: Rated 100W
Operating temperature: -10 ℃ -60 ℃
Short-circuit protection: Eddective
Flashlight : Illumination, SOS, Strobe, and Off
Producrt size(L*W*H): 190*83*40mm
Packing List:
1 x Car Jump Starter,
1 x Smart Jumper clamps,
1 x Type C Cable,
1 x User Manual,
1x EC5 Cigarette Lighter Adapter,
1 x Storage Case.
(The portable car jump starter's built-in protection circuit works with intelligent alligator clamps features more than 8 advanced safety protections.)
How to charge your UTRAI starter?
Type C Charging your Jump Starter anywhere
4-5 hours full Charging
★At Home :
1. Plug the USB cable into computer or any USB 2A wall adaptor (not included).
2. Connect the Type-C port into the Jump Starter.
★In Car :
1. Plug the car adaptor (not included) into the socket.
2. Connect the Type-C port into the Jump Starter.
★Outdoor :
You can use the solar charging panel to charge the jump starter, but pls confirm the output voltage/current is ≤DC5V/3A,otherwise the jump starter will enter the protection state.
Tip note:
1. Please read this manual carefully before using the device.
2. The device must not be used in place of a car battery.
3. Do not use the device as a toy.
4. To reduce the risk of injury, closely supervise any children that are around the device.
5. The device is intended for the jump starting of a 12V car battery and should not be used for any other purposes.
6. Please use the battery clips provided. If the battery clip or cable is damaged, do not use the device as it may result in fire, electric shock or other personal injuries.
7. Do connect the positive and negative ends of the battery directly.
8. Before jump starting the car battery, ensure that the connections are free of rust and other foreign objects. Connect the device securely to the battery clips to prevent the jump start performance from being affected by poor connection.
9. After the car battery is jump started successfully, disconnect the device from the car battery within 30 seconds to prevent any damage.
10. Do not use the device for more than 3 consecutive times. Otherwise, the device may overheat and be damaged. If multiple jump starts are to be performed, ensure there is an interval of 2 minutes between each jump starts.
11. Do not use the clips to charge any other devices.
12. Do not place the product in an environment where the temperature exceeds 60℃.
13. Charging should be done at room temperature of between 0℃ to 45℃.
14. Do not place the device in extreme heat or in a fire.
15.Do not expose the device to rain or submerge it in water.
16. Do not use the product in an environment with explosion risk, such as in near flammable liquids or gases, or in the presence of dust.
17. Before using the device, ensure that someone is near enough to hear you or provide assistance to you.
18. Before using the device, remove any metallic objects on your body, such as rings, bracelets and necklaces.
19. To reduce the risk of damage to the power plug and cable, please disconnect the device from the battery clips using the battery clip plug.
20. Do not use any damaged or modified batteries. Otherwise it may lead to unpredictable consequences such as fire, explosion or injuries.
21. Please use the charging cable provided or one of similar specification to the device's input port to charge the device.
22. Do not charge the device immediately after it is being used to jump start a car battery.
23. Do not use the device to jump start a car battery while it is being charged.
24. In extreme cases, fluid may leak from the battery. Do not allow the fluid to come into direct contact with you hand or skin. In case of contact, wash the part immediately with soap and water. If the fluid accidentally gets in your eyes. Wash your eyes using cold water for at least 10 minutes before seeking medical attention immediately.
25. As the device contains a lithium battery, dispose it in accordance with the local regulations at the end of the product's service life.
FAQ
Q: Can I binge watch a TV show with this while tv is plug in this battery out in the woods
A: hello,dear customer it can charge for you TV,but you must make sure your TV is below 100w power,our jump satrter only support 100w AC output,thank you!
Q: How long does it hold a charge?
A: This is 23800mAH big capacity jump starter,it hold more time than normal jumper. Use for charging ,it depend on the power of the appliance, it can charge for 100w device. If only starter the car,the jump starter can jump 30 times.You can check the battery indicator before use.
Q: How do you charge the car jump starter? Does it come with a cable or adapter?
A: Yes, it come with a DC adapter and a plug converter,you can charge the car jump starter with them,the power capacity will display 100% when the battery is full.
Q: The jump starter AC output can charge the fan or computer?
A: Yes, you can charge your fan and computer,this car jump starter maximum power of the AC output is 100W, you can charge all the electric appliances within 100W. The jump start can get a quick start with AC and DC output, and it also come with a plug converter.Very convenient.
Q: How to turn off this power pack?
A: This power pack will power off automatically when no load or charging is complete.
Q: What kind of adapter should I use?
A: You can use the adapter of your phone or tablet..
Q: How long time to full charge the YABER YR800 jump starter?
A: About 5-6 hours through the 5V2A AC adapter.
Q: How many times can this product start the vehicle with full capacity?
A: Up to 30 times.
