Vgate iCar 2 bluetooth/wifi
Note:
This elm327 usually can work on most new car with OBD 16pin Aadapter and 12V engine:
For USA Car brand,after 1996;
For Europe Car brand(petrol),after 2001;
For Europe Car brand(diesel),after 2004;
For Japan/Korea Car brand,after 2002;
For Chinese Car brand,after 2009;
For Indian Car brand,after 2010;
For Russian Car brand,after 2011;
Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep;
Fit for Alfa Romeo, Fit for SAAB, Fit for Acura, Fit for Opel, Fit for Audi, Fit for Seat, Fit for Peugeot ,Fit for Renault, Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu, Fit for Land Rover, Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar;
Fit for KIA , Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda, Fit for Nissan, Fit for Subaru , Fit for Suzuki, Fit for Toyota;……
*For Ssangyong car makes, please don't purchase If your car is before 2008.
*For Renault Dacia Logan car model, please don't purchase If your car is before 2009.
If your vehicle does not fall into any of the above categories, look under the hood and try to locate a label that explicitly states that the vehicle was designed to comply with OBD-2 legislation.
In this case, OBD2 is used as a general term and can mean any of the following:
OBD II (California ARB)
EOBD (European OBD)
JOBD (Japanese OBD)
You can also consult your vehicle’s owner’s manual and perhaps contact your local dealer. However, be aware of the fact that many dealers do not know the difference between OBD and OBD2. If the vehicle is not OBD2 compliant, you cannot use a generic OBD2 scan tool such as ElmScan to obtain diagnostic information from your vehicle.
But my car has the 16-pin OBD connector, shouldn’t it be OBD2 compliant?
No, not necessarily. A lot of European and Asian manufacturers equipped their vehicles with D-shaped 16-pin connectors long before they began installing OBD2 systems on those vehicles. One curious thing to note here is the fact that most non-EOBD compliant vehicles had a DLC that does not fully conform to SAE J1979.
ICAR2 bluetooth ,in program ELM327 identifier,it shows below.
ICAR2 wifi ,in program ELM327 identifier,it shows below.
· Small size, compact structure. Plug and never unplug
· Stable wireless connection
· No wires or batteries (adapter is powered by the diagnosis size sockets)
· Stop communication, wait half an hour, auto sleep
· Supports almost all OBDII protocols
· The adapter uses the fastest and most reliable ARM chips
The device is a small adapter that plugged into the vehicle OBD-connector. On bluetooth,it connects to any computer, tablet or smartphone, With associated diagnostic procedures. Doing these simple operations, you will be able:
· Read, erase and display code descriptions problems – both standard and spetskodov manufacturers.
· Measure the fuel consumption.
· Display real-time operating performance of the car, such as momentum, vehicle speed, oil pressure, coolant temperature, engine load, intake manifold pressure, throttle position, the values of oxygen sensors, air intake temperature, and more.
· Turn off the MIL (signal Check Engine).
· Download data to external media in a variety of formats for later printing.
· Record various parameters, display graphics in real time, and more.
With iCar you will be able to perform a complete computer diagnostics car and even to correct minor faults without resorting to service stations.
Protocols supported:
0.Automatic
1.SAE J1850 PWM(41.6Kbaud)( for icar2 wifi only)
2.SAE J1850 VPW(10.4Kbaud) (for icar 2 wifi only)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
*default settings(user adjustable)
The type of support:
1.Works with all OBD-II compliant vehicles
2.Wireless (wifi version) 10~20 meter
3.iCar(wifi version) support for software applications
for ios(iphone4/4s/5/5s/ipad/mini),Android,java,etc)
Packing List:
1x iCar 2 bluetooth
1x CD
1x Carrying box
FAQ(pictures are for referation only):
Note:if icar bluetooth, the OBDII name is V-LINK,Please know it.
icar2 bluetooth:
