Xiaomi Mijia WiFi Repeater Pro 300M Mi Amplifier Network Expander Router Power Extender Roteador 2 Antenna for Router Wi-Fi
Features:
1. Two powerful high gain external antennas provide wider coverage and better performance.
2. Wireless function to increase wireless coverage.
3. Transmission rate: 300Mbps.
4. Support up to 64 devices to meet the needs of the entire family.
5. Easily manage the network settings of the Xiaomi mi WiFi app.
6. This amplifier will be updated automatically without any adjustments.
7. Plug and play, easy to use.
Descriptions:
1. Powerful high gain external antenna provides wider coverage and better performance, increasing wireless coverage. Plug and play, easy to use.
Specifications:
Material: PC/ABS
Transmission rate: 300 (Mbps)
Network standard: IEEE 802.11n / IEEE 802.11b / IEEE 802.11g
Processor: MT7628K
ROM : 2MB Nor Flash
Memory: Built-in 8MB DDR1
2.4G Wifi : 2 * 2
Antenna: 2 external omnidirectional high gain antennas (2.4G maximum gain 3dBi)
Colour: Black
Size: 80*70*54mm
Package Included:
1 x WIFI amplifier
FAQ:
Why can't find an amplifier in my device?
You need to choose mainland China, then find this device, and then connect, because the amplifier is in Chiness version
What do the different colors of the indicator light mean?
The blue light is always on: the amplifier is running normally, and the WiFi pairing is successful.
The yellow light is always on: the amplifier is starting up, the process is very short, about 10 seconds.
Blinking blue: Waiting for pairing, pairing, or pairing failed.The pairing failed. The original network's WiFi password may be changed or it may be far from the original network.
Steady red light: The boot failed, please re-plug and try to repair. If the problem persists, please call after-sales service.
Why The amplifier is always flashing orange, then the blue light is flashing?
The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed.
Please upgrade your router to the latest development or stable version (2.0 or above)
Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair
The paired amplifier appears blue flashing
Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing
How to customize the network name and password of the amplifier?
Not supported yet,
How to upgrade the firmware?
When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade;
In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client.
Why can't the amplifier get the signal from the router?
Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .
Original Xiaomi Pro 300M WiFi Router Amplifier Repeater Signal Cover Extender Roteador 2 Wireless Router Repetidor Mi repeater