This Wayne Dalton model 327310 / 3973C is a 3-Button Remote Control Transmitter works with Wayne Dalton Classic Drive garage door opener models using 372 MHz radio frequency. This unit replaces the no longer available model 300643 and 302083.
Description:
1.Type of programming: Programming with the receiver
2.Number of channels: 4
3. Code: rolling code
4. Frequency: 372MHz/433MHz
5.Woring Range: 10-150 m (open space)
6.Power supply: 12V 27A
7.Remote come with Battery !!!
Compatible with the following Wayne Dalton Openers
All Wayne Dalton i-Drive openers
Classic Drive model 3014, 3018, and 3514
Quantum model, 3214, 3314, 3316, and 3414
All Wayne Dalton Pro-drive Models 3220C, 3221C, 3222C, 3224C, 3220B, 3322B, and 3324B
If you are unsure that this is the correct item for your needs, please email us. We would rather you ask a question prior to purchase rather than after, just be sure to include as much information as you can about your garage door opener, any existing remotes, and your current receiver.
Programming:
Program to Gate / Garage Door Openers the same way as original WISNIOWSKI remotes,please refer to your receiver’s user manual.
Materials required for programming: your receiver!
1.Open your receiver from the garage door.
2.Press the programming button. Inscription is usually: ENR, MEMO or PROG.
3.On some receivers, it is necessary to hold down the programming button.
4..On the receiver the LED indicates the start of the programming mode.
5.Press for one second on a button on the new remote control and let it go again.
6.The LED of the receiver will light differently or goes out to indicate a successful programming.
7.Wait a few seconds to exit the programming mode.
8.Congratulations! Your new remote control is programmed!
Note:
This is a third-party remote control,No original goods, but 100% perfect fit!
All brand names, trademarks and registered trademarks are the property of
their legal owners and are used here only for the description or identification of the devices.
The remote control has the same functions as the original remote control.
After obtaining the remote control, the new remote control should be programmed according to the manual.
include
Remote Control
Battery
Keychain
Russian Manual