WiFi Smoke Detector Tuya Smart Life APP Control Smoke Detector WiFi Alarm Detector Smoke Sensor
This WiFi strobe smoke detector is the device which can detect smoke occurred at the beginning of a fire disaster and generates live strobe &sound alarm, at the same time, push alarm information to mobile app by WiFi.
Technical Parameter
Power supply：DC9V alkaline battery (no include 6LR61)
Static current：<10uA
Alarm current: <100mA
Working temperature：0℃ ～ +50℃
Humidity：≦95%RH，no freezing
Alarm sound：>80dB
Low battery alert：≦7.0V±0.2V
Mute & Testing
Mute: in alarm status, press the ‘TEST’ button to mute the buzzer, only LED indicator flashes.
Testing: in normal status, long press ‘TEST’ button for 2s to trigger the sound & light alarm, alarm message is pushed to the mobile APP.
WiFi configuration & Networking:
Install ‘Tuya Smart’ APP on your smartphone the first time you use the detector.
Make sure your smartphone is connected to the WiFi.
a) Launch the APP, click ‘Add device’—’Security Sensor’—’Sensor (WiFi)’ / “Smoke(WiFi)”.
b) Long press the ‘TEST’ button for 5s until LED flashes with a short beep of ‘Di’ (long press the button within 20s of loading the battery to enter WiFi configuration mode).
c) Click ‘OK’ in the APP—input password for the WiFi an click ’OK’, the detector enters configuration mode which lasts for 60s maximum.
A long beep of ‘Di’ with LED indicator on for 10s means the WiFi configuration is completed. When WiFi configuration fails, the detector exits configuration mode with short beep of ‘Di Di Di’.
WiFi configuration is done based on the 3 steps above.
WiFi Networking Status: when LED indicator is on for 10s after battery is loaded, it means the detector is successfully connected to WiFi.
Installing method
a. Make a hole on the ceiling by using the percussion drill
b. Install the expansion tube on the ceiling
c. Fix the installation board by using the screw
d. Aiming the alarming device with the installing board and connect them, rotating clockwise till heard the “kaca” sound, means installing correctl
Feature:
Wifi connection
Easy to install
Public Tuya app
Auto-rest after smoke clearing
Self-test button
Red led light indication
Live strobe and sound alarm notification
Mute function: during alarm, press test button can mute the device with only flashing led light left
Low battery alert
Low power consumption
product description :
Alarms using photoelectric or ionic smoke sensors are stable and reliable, and their performance is far superior to fire alarms of gas-sensitive resistors. This alarm can be used to make timely alarms on the smoke from various early fires. The product is small and compact, and it can organically combine wireless transmission and fire smoke sensors. When used alone: first fix its installation base on the ceiling of the hall to be monitored, connect the battery to this alarm, and then screw it into the installation base. In the working state, once the smoke concentration and duration in the guard space reach the alarm value, the buzzer will sound immediately. When matching with the wireless anti-theft alarm system: the installation and use are the same as those used alone. When the alarm is alarming, it will also transmit a wireless signal to the wireless anti-theft alarm host at the same time. The alarm host will respond to the alarm whether it is in the armed or disarmed state (more The ringing siren sounds and automatically dials the preset phone alarm at the same time). With this method of use, the alarm range is wider, and when there is no one in the house, the fire alarm can be grasped in time, so that the alarm can be given at the first time.
Features:
◆ Photoelectric detection method ◆ Ceiling installation ◆ Optical Labyrinth ◆ Adopt low power consumption CMOS microprocessor ◆ Special moisture-proof design ◆ Independent/Wired network/Wireless output method (optional) ◆ With manual test function ◆ Stable and reliable working performance ◆Single-sided PCB process ◆Using ultra-thin structure design ◆ Unique structural design, dust-proof, insect-proof, and anti-interference from external light
Technical parameter:
Function: 433 wireless signal Working voltage: DC9V 6F22 battery(Not Included) Static current: ≤10uA Alarm current: ≤15mA Working temperature: -10℃～+50℃ Working humidity: ≤95%RH Alarm method: sound and light alarm Sound loudness: ≥85DB
