Features:
CNC all-metal active dual-gear extruder
Way of working:
Direct extruder long-distance filament feeding (easy to change)
Compatible accessories: E3D v6 titanium alloy hose, titanium alloy nozzle, titanium alloy M6 adapter…
Thanks for the feedback from some customers, gear problems, The product has been improved.
Installation note: The gear clearance is adjustable. Reserve a 0.3 mm gap in the mounting hole.
For details, please check: //github.com/my3dltd/OMG-V2-S/blob/main/OMG%20V2-S%20Installation%20Instructions.pdf
MY3D team
Compatible models
Creality CR-10
Creality CR-10-S
Creality CR-10-S5
Creality CR-10-S4
Creality CR-10 MINI
Creality CR-20 / Creality CR-20 Pro
Ender 2 / Ender 3 / Ender 3 Pro / Ender 5
TronXY X5S
TronXY X5S
Tevo Tornado
▶Product ID: OMG-V2-S Extruder
Suitable filament diameter 1.75mm
The diameter of the extrusion wheel:8mm
Extrusion reduction ratio: 1:3
Motor torque output 3 times
36 42 stepper motors can be used
Dimensions F: 19.5*42*48mm
Weight about: 64g (F)
V2 S is an upgraded version of V2
3D step file and installation instructions download:
//github.com/my3dltd/OMG-V2-S
Step Value Modification
42/Stepper motor step approach angle1.8° (pulse number)
16 subdivision: 385
36 stepper motor, step approach angle 0.9°
16 subdivision: 760
The diameter of the extrusion wheel:
OMG-V2 S: 8mm
The above values are for reference only: it is recommended to print a fixed numerical size model to measure the accuracy of the printed product.
Solve the drawing
Retraction is accurate and can be adjusted to a higher speed,
Test setup-PLA ABS hard filament: Retraction speed (mm/s) 25-30 distance (mm) 6-8
Flexible filaments such as TPU need to be re-adjusted according to different materials.
Compatible 3D Printer
Standard motor mounting hole 42 stepper motor
Remote extrusion is compatible with most aluminum profile 3D printers (standard 42 stepper motor mounting hole pitch 31mm) including Ender 3 Ender3 v2 Ender 3 pro, etc.
Left-Right Handed Compatibility
Adjust the#Invert the stepper direction.
>INVERT_E0_DIR 1 or 0
Far distance Mounting Plate
OMG ID:F42
Suitable for standard 20*20 aluminum profiles.
CNC aluminum
This mounting plate is not necessary. Some machines can not be used, such as ENTER 3 V2.
Installation
Pay attention to the stepper motor gear and tighten the screw position to prevent interference with the reduction gear. Correct as shown below.
Direct Extrusion installation
Adaptation for Close range,We will continue to increase the adaptation and installation accessories, suitable for different models.
The following are some of the adapted parts
ID:M6A (TC4)
Titanium alloy material. TC4
M6 threads at both ends, transparent Teflon tube inside the middle through hole, you can observe the filament, and it has no heat conduction.
Features: Between the hot end and the heat dissipation connection: working temperature -100 ~ 550 (℃)
The strength of TC4 sb=1.012GPa, the density g=4.51g/cm3, the specific strength sb/g=23.5,
The thermal conductivity is 1/5 that of iron and 1/10 that of aluminum. The thermal conductivity of TC4 is l=7.955W/m·K.
ID:TC4-04
Material: Titanium alloy nozzle, diameter 0.4mm
ID:TC4-H2
Material: Titanium alloy hose, Teflon is not directly connected to the heating block. Avoid high temperature Teflon hose melting.
Heat dissipation is E3D v6 M7 thread
Hot end M6 thread
ID:10M6
Material: Stainless steel
Connect OMG extruder and E3D v6
M6 M10 thread
OMG V2-S upgrade instructions
1/ Change the color to silver-sandblasting oxidation treatment.
2/ The gear diameter of the V2-S upgraded model is adjusted to 8mm, and the arc of the filament is increased.
(V2 old gear diameter 8.8 is not compatible with V2-S)
3/ Added 2 options of steel gear and copper gear.
4/ Added support for BL automatic leveling and 40 cooling fan mounting holes.
If you need OMG V2 old gears. We will continue to provide supporting support (only copper gears).
3D Step file download:
//github.com/my3dltd/OMG-V2-S
V2-S style extruder-the concave arc of the filament gear is larger, which increases the contact area with the filament.
The position of the filament through the positioning hole is different, and the gears of V2-S and V2 are not universally compatible.