IP68 Waterproof Outdoor LED Keypad Metal Standalone Access Control Wiegand 26 Fast Operating Speed RF Door Access 12V and 24V
I. Key features
1 |
Waterproof, conforms to IP68 |
2 |
Strong Zinc Alloy Electroplated anti-vandal case |
3 |
Full programming from the keypad |
4 |
2000 uses, supports Card, PIN, Card + PIN |
5 |
Can be used as a stand alone keypad |
6 |
Backlight keys |
7 |
Wiegand 26 output for connection to a controller |
8 |
Adjustable Door Output time, Alarm time, Door Open time |
9 |
Very low power consumption (30mA) |
10 |
Fast operating speed, <20ms with 2000 users |
11 |
Lock output current short circuit protection |
12 |
Easy to install and program |
13 |
Built in light dependent resistor (LDR) for anti tamper |
14 |
Built in buzzer |
15 |
Red, Yellow and Green LEDS display the working status |
II. Description
1. Single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. |
2. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is available in either a bright silver or matt silver finish. |
3. Waterproof and conforms to IP68.Supports up to 2000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports125KHZ EM cards,13.56MHz Mifare cards(if you need Mifare,pls connect with us ). |
4. Lock output current short circuit protection, Wiegand output , and a backlight keypad. |
5. Ideal choice for door access not only for small shops and domestic households but also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons. |
III.Specifications
Operating Voltage |
9V-28V |
User Capacity |
2000 |
Card Reading Distance |
3-6 cm |
Active Current |
Less than 60mA |
Idle Current |
25±5 mA |
Lock Output Load |
Max 3A |
Alarm Output Load |
Max 20A |
Operating Temperature |
-45 – 60 |
Operating Humidity |
10%- 90% RH |
Environment |
Conforms to IP68 |
Adjustable Door Relay time |
0 -99 seconds |
Adjustable Alarm Time |
0- 3 minutes |
Wiegand Interface |
Wiegand 26 bit |
Wiring Connections |
Electric Lock, Exit Button,, External Alarm |
Dimensions |
L120 x W56 x H18 mm |
IV.Wiring
Colour |
Function |
Description |
Pink |
BELL_A |
Doorbell button one end |
Pale blue |
BELL_B |
Doorbell button to the other end |
Green |
D0 |
WG output D0 |
White |
D1 |
WG output D1 |
Grey |
ALARM |
Alarm negative(alarm positive connected 12 V+) |
Yellow |
OPEN |
Exit button one end(the other end connected GND) |
Brown |
D_IN |
Magnetic switch one end(the other end connected GND) |
Red |
12V+ |
12V + DC Regulated Power Input |
Black |
GND |
12V – DC Regulated Power Input |
Blue |
NO |
Relay normally-on end(Connect positive electric lock “-“) |
Purple |
COM |
Relay Public end, connect GND |
Orange |
NC |
Relay Closed end(connect negative electric lock “-“) |
V.Sound and Light indication
Operation Status |
Red Light |
Green Light |
Yellow Light |
Buzzer |
Power on |
– |
Bright |
– |
Di |
Stand by |
Bright |
– |
– |
– |
Press keypad |
– |
– |
– |
Di |
Operation successful |
– |
Bright |
– |
Di |
Operation failed |
– |
– |
– |
DiDiDi |
Enter into programming mode |
Bright |
– |
– |
|
In the programming mode |
– |
– |
Bright |
Di |
Exit from the programming mode |
Bright |
– |
– |
Di |
Open the door |
– |
Bright |
– |
Di |
Alarm |
Bright |
– |
– |
Alarm |
VI.To Reset to Factory Default
a. Disconnect power from the unit
b. Press and hold # key whilst powering the unit back up
c. On hearing two “Di” release # key, system is now back factory settings
Please note only installer data is restored, user data will not be affected
VII.Anti Tamper Alarm
The unit uses a LDR (light dependent resistor) as an anti tamper alarm. If the keypad is removed from the cover then the tamper alarm will operate.
- 1Pcs waterproof rfid access control
- screws
- 1pcs english user manual
1.You have 7days to contact us and 10days to return it from the date it was received. IF this item in Your Possession more than 7days,It is considered used and WE WILL NO ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS!
2.All returned items MUST BE in the original packing and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your Aliexpress ID.
3.We will refund YOUR FULL WINNING BIG AMOUNT, upon receipt of the item in its original condition and Packaging with allComponents and accessories included, After BOTH Buyer and seller cancel the transaction from Aliexpress. Or, You may choose to have a replacement.
1. 12 months Manufacturer’s warranty for defective items(excluding items damaged and/or misused after
receipt).Accessories come with a 3-month warranty.
2. Defective items MUST BE reported and return to us within the warranty period(and in the original
packaging,IF possible)You must tell us what the defect is and give us your Aliexpress ID,WE DO NOT REPAIR
OR REPLACE ITEMS WITH AN EXPIRED WARRANTY!
3.Negative feedback or Low DSR does not resolve any underlying issues.If you have any problems with our items or services,please feel free to contact us first before you leave negative feedback. We will do our best to solve any problems and provide you with the best customer services.
1. Before ordering please contact us to confirm your preferred shipment method. Items are only shipped after payment is confirmed
2. Delivery,We will ship every order with their tracking numberm and you can view the shipment status on the corresponding website.
DHL/Fedex/Aramex/UPS: 3-7 days EMS: 5-15 days
HK post: 10-30 days China post:10-30 days
3.We are not responsible for any accidents,delays or other issues that are the responsibility of the shipping service.
4. Please make sure that you have no difficulty to clearing customs and make sure you are available in the address you filled on Aliexpress.
5. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility