100% clone your HORMANN blue button 868MHz
shipped within 24 hours (except holidays)
Feature
1. Free Battery
2. Free Coding Instructions
3. Free Keychain
4. MINI Design
5. In-built Battery
6. Button Protector
Specification:
Product material: ABS
Product weight: 40 g
Product color: Black + silver
Rated voltage: 3v
Installation: wireless
For: Such as electric telescopic door remote control, road gate remote control, alarm remote control and so on.
Wireless transmission distance: 50-150 (m). (open space)
Frequency:868MHz, 868.3MHz
Usage:Fifteen seconds clone, can be used directly after cloning
Compatibility list:
Hormann hsm2 868 ,hsm4 868,
Hormann hs1 868,hs2 868,hs4 868,
Hormann hse2 868,hse4 868
Hormann hsz1 868,hsz2 868,
Hormann hsp4 868,hsp4-c 868,
Hormann hsd2-A 868,hsd2-c 868
Marantec Digital D382 868
Marantec Digital D384 868
Marantec Digital D302 868
Marantec Digital D304 868
Marantec Digital D313 868
Marantec Digital D321 868
Marantec Digital D323 868
Marantec Command 131 868
BERNER BHS110
BERNER BHS121
BERNER BHS130
BERNER BHS140
BERNER BHS153
BERNER BHS211
BERNER BHS221
SMG-V2.0 Newest Chip RED LED
RED LED is the best
Note
Only applicable to HORMANN blue buttons, not applicable to HORMANN BS series
How to program (Cloning is completed in 10 seconds and can be used directly after cloning)
Face to face copy your original remote control
Step:1:Clear the history code from duplicator
1:Press button A and B continuously until LED flash 3 times
2.Release button B (Keep pressing button A),and press button B Slowly for 3 times,LED flash
3.Release button A ,finish code clearance.
Step 2,Copy code from original transmitter
1. Put duplicator aside of original transmitter,as close as possible.
2. Press and hold button A of original transmitter,then press and hold button A of duplicator until you see the duplicator is LED flash
3. Release both buttons,finish code copy,copy other button in same way.
Button A= Lock button
Button B=Unlock button
Package includes:
1*Remote Control(Battery Include)
1*Keychain
1*English Manual(card)
Car Sun Visor Clip
Specification:
Product name: Garage Remote Clip
Condition: New
Color: Black
Dimension: 65.5*35.5*14cm
Quantity: 1pc
Adjustable holder, fit devices width from 47-70mm width; No extra tool needed, easy to install;
Fit for various aftermarket garage remotes
Please Note: Remotes pictured in the listing are not included
Note:
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.
Professional certificate, quality assurance
There is a problem with the remote control, we will refund it
Products Recommended
How to program (Cloning is completed in 10 seconds and can be used directly after cloning)
Face to face copy your original remote control
Step:1:Clear the history code from duplicator
1:Press button A and B continuously until LED flash 3 times
2.Release button B (Keep pressing button A),and press button B Slowly for 3 times,LED flash
3.Release button A ,finish code clearance.
Step 2,Copy code from original transmitter
1. Put duplicator aside of original transmitter,as close as possible.
2. Press and hold button A of original transmitter,then press and hold button A of duplicator until you see the duplicator is LED flash
3. Release both buttons,finish code copy,copy other button in same way.
Button A= Lock button
Button B=Unlock button