·Power supply: DC12V, >500mA
·Output: Relay(Max. current:10A)
·Standby current: 12uA
·Fingerprint capacity: 120 pieces
·Size: 62*25.4mm
·Output: Relay(Max. current:10A)
·Standby current: 12uA
·Fingerprint capacity: 120 pieces
·Size: 62*25.4mm
K261 is designed for low power consumption, the power supply is DC12V, the relay time can be adjusted by rotating the button, relay time: 0.5-13 seconds.
It is very easy to register fingerprint, just need to press SET button to register fingerprint and long press SET button to back to factory default.
K261+R557, the R557 fingerprint module is low sensing array, only have 160*160 pixel, when register fingerprint, you have to put multiple time in register fingerprint.
If you have high requirements for products and design, we suggest you can chose R503,R502-A serials products, like K202+R503,K215-V1.3+R503,K216 +R503 board and so on.
Helpful hints:
If need to connect with car,motorcycle, and needs high security product,suggest to high pixel fingerprint module, like K202+R503,K215-V1.3+R503,K216 +R503 board and so on.
1.SET Button:
Press SET button shortly,blue indicator light in control board flash fast and system in register state, put the same finger with multiple times on fingerprint collection area, until hearing music means fingerprint register successful. Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds to exit.
2.Back to factory default:
Press SET button until hear “Di” long beep and music,means initialization operation successful.
3.Set Relay Time:
Rotate the relay rotation button to set the closing time of the relay from 0.5 to 13 seconds. The relay is contact output, switch signal, no voltage output.
4.Usage:
Press the finger,the relay closes after the fingerprint passes, and the closing time is determined by relay rotation button.
Note:1. All indicator lights are off in standby state, and the lights are on in working state;
2. Any fingerprint can be used in the factory state, but the function will be invalid after the fingerprint is registered.
K261 only can connect with R557, can not connect with R502,R502- A,R503
Operation video on Youtube: //youtu.be/C_J1l16HDkc
|
Model
|
R557
|
|
Type
|
Capacitive Fingerprint Module
|
|
Interface
|
UART(TTL)
|
|
Resolution
|
508 DPI
|
|
Voltage
|
DC 3.3V
|
|
Fingerprint Capacity
|
120
|
|
Sensing array
|
160*160 pixel
|
|
Working current
|
30mA
|
|
Standby current
|
Typical touch standby voltage: 3.3V, Average current: 5uA
|
|
Fingerprint module external size
|
Diameter 21(mm)
|
|
Fingerprint module height
|
6.2(mm)
|
|
Effective collection area
|
Diameter 12.8 (mm)
|
|
Finger Touch Function
|
Yes
|
|
LED Color
|
Blue-Green-Red
|
|
Connector
|
MX 1.0mm 6Pin
|
|
Scanning Speed
|
< 0.2 second
|
|
Verification Speed
|
< 0.3 second
|
|
Matching Method
|
1:1; 1:N
|
|
FRR
|
≤1%
|
|
FAR
|
≤0.001%
|
|
Work environment
|
-20C —60C
|
|
Work Humidity
|
10-85%
|
|
Anti-static capacity
|
15KV
|
|
Abrasive resistance intensity
|
1 million times
|
|
Communications baud rate (UART):
|
(9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps)
|
·ProvideFree Reference SDK Files for Arduino, Android,.Net,Windows and so on.
·Provide User Manual
·Provide User Manual
You can dowload the K261 user manual from this website link:
//www.dropbox.com/sh/9itshhkx0r9mdyt/AABPH-Dhleve3A1Mn5ZA34pCa?dl=0
If need SDK files,pls contact us.
Operation Video on Youtube://youtu.be/C_J1l16HDkc
