This product is not suitable for bank cards! !
If the device cannot be connected, please do not put the battery when connecting to the computer
This machine only supports 125khz, 250khz, 375khz, 500khz, 625khz, 750khz, 875khz, 1M, HID-125khz, 13.56mhz (ic mode) read and copy, supports most IC encryption card decryption (but not all), does not support Copy CUID and FUID chip cards, do not support cards with power supply
How to Crack encryption 13.56Mhz cards:
Support cuid/fuid/ufuid chip card
Please read it carefully and follow the steps as below:1. High-definition 3.2-inch full-color screen, clear display, built-in multi-language
2. Support language broadcast
3. This model is a locksmith version of the duplicator, supports copying full-band ID, IC encryption card, with its own decoding, and can be directly configured with various access control cards and smart cards
4. Support read and write frequency: 125 khz, 250 khz, 375 khz, 500 khz, 625 khz, 750 khz, 875 khz, 1000 khz, 13.56 khz, and support hidden proximity card (HID card-125Khz).
5. Compatible with all blank cards, universal in the whole market
6. Support 8310, 8265, 8268
7. Support CUID, UFUID, FUID
8. Solve IC/ID firewall, support copy elevator card, card with firewall
9. Support manual modification of card number
10. Use 4 AAA batteries, standard handheld, easy to carry
When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.
Conneted with copier with computer via USB cable,
then Press the “on/off” button,
then the copier will be show the “Disclaimer”page,
NOT press any button on the Copier,
then your computer will show a removeable disk,
open the disk,
there are the manual and the software,
Press the button “OK” to agree with the Disclaimer on the computer fistly,
then argee with the copier's “Disclaimer”page,
that's will be connect successfully,
put your original cards on the back side of the Read/Write area,
then press the button “scan”to crack the passwords,
after 2 or 5 minutes,the passwords will be cracked successfully,
then put one UID cards in the read/write area,
then press”write”button,
that will be ok.
How to copy the 125khz RFID cards:
Press the “on/off “button,
put the original 125khz cards on the back of the copier,
then the copier will be show the “Disclaimer”page,
Press “ok” button,
then put the cards on the back side of the copier,
then press”scan”,
then the copier will auto scan it is 125khz cards,
and the copier will show the card number,
then we put one writable EM4305 key on the back side of the copier,
then press”Write”,
