Important:
If you have any questions about EU Tax, Please chat with me
VTO2111D-P-S2 uses a new hardware motherboard, its firmware is different from the old model VTO2111, please do not use the old firmware to upgrade it.
Scenes 1 :Work with 802.3af PoE monitor
Use Access Control Extension Module(DEE1010B) to control two locks
Door Station model:VTO2111D-P-S2
System |
||||||||
Main Processor |
Embedded processor |
|||||||
Operating System |
Embedded LINUX operating system |
|||||||
Button Type |
Mechanical |
|||||||
Interoperability |
ONVIF |
|||||||
Internet Protocol |
SIP; P2P; IPv4; DNS; RTSP; RTP; TCP; UDP |
|||||||
Baisc |
||||||||
Camera |
1/4″ 1MP CMOS high definition, low illumination/WDR, color/IR |
|||||||
Angle of View |
Horizontal: 107°; vertical: 61°; diagonal: 122° |
|||||||
WDR |
Yes |
|||||||
Noise Reduction |
3D noise reduction |
|||||||
Video Compression |
H.264 |
|||||||
Video Resolution |
Main stream: WVGA, 720P, D1 |
|||||||
Sub stream: CIF, WVGA, QVGA, 1080P, D1 |
||||||||
Frame Rate |
PAL: 25 fps NTSC: 30 fps |
|||||||
Video Bit Rate |
256K to 4M |
|||||||
Light Compensation |
Auto IR |
|||||||
D/N |
ICR auto switch |
|||||||
Audio Compression |
G.711a; PCM; AAC |
|||||||
Audio Input |
1 |
|||||||
Audio Output |
Built-in speaker |
|||||||
Audio Mode |
Two-way voice call |
|||||||
Audio Enhancement |
Echo suppression and cancellation/digital noise reduction |
|||||||
Audio Bit Rate |
16KHz, 16Bit |
|||||||
Function |
||||||||
Communication |
Full digital |
|||||||
Unlock Mode |
Card/App remote/indoor monitor unlock |
|||||||
Card Type |
IC card |
|||||||
Motion Detection |
Video motion detection |
|||||||
Auto Snapshot |
Auto snapshot can only be enabled on indoor monitors |
|||||||
Leave Photos and Messages |
Yes (SD card is needed) |
|||||||
Web Configuration |
Yes |
|||||||
Performance |
||||||||
Card Reading Distance |
3cm–5cm |
|||||||
Casing |
PC+Acrylic |
|||||||
Capacity |
||||||||
Card |
10,000 |
|||||||
Port |
||||||||
RS-485 |
1 |
|||||||
Electric Lock |
1 |
|||||||
Exit Button |
1 |
|||||||
Door Status Detection |
1 |
|||||||
Lock Control |
1, normally closed by default |
|||||||
Network |
1 10Mbps/100Mbps network port (8-core white ribbon cable) |
|||||||
Alarm |
||||||||
Tamper |
Yes |
|||||||
General |
||||||||
Color |
Black |
|||||||
Power Supply Mode |
12V DC 1A |
|||||||
Standard PoE |
||||||||
Installation |
Surface mount |
|||||||
Certifications |
CE |
|||||||
FCC |
||||||||
UL |
||||||||
Accessory |
Brackets and alarm ribbon cable |
|||||||
Dimensions |
135mm×70.4mm×34.4mm (5.31″×2.77″×1.35″) |
|||||||
Protection Grade |
IP65 (silicone sealant is needed, see the quick start guide) |
|||||||
Operating Temperature |
-30°C to +60°C (-20°F to +60°F ) |
|||||||
Operating Humidity |
10%RH–90%RH (non-condensing) |
|||||||
Operating Altitude |
Beneath 3000 m (9842.52 ft) |
|||||||
Power Consumption |
Standby≤1W, working≤5W |
|||||||
Gross Weight |
326 g (0.72 lb) |
Indoor Monitor model : VTH2421FW-P
Technical Specification |
||||||||
Main Processor |
High performace embedded processor |
|||||||
Operating System |
Embedded LINUX OS |
|||||||
Screen Type |
Capacitive screen |
|||||||
Display |
7-inch TFT screen |
|||||||
Resolution |
1024 × 600 |
|||||||
Video Compression |
H.264 |
|||||||
Audio Compression |
G.711A/G.711U/PCM |
|||||||
Audio Input |
1 channel all-direction microphone |
|||||||
Audio Output |
Built-in 1.5W loudspeaker |
|||||||
Audio Mode |
Support dual-way bidirectional talk |
|||||||
Audio Enhancement |
Support echo cancellation/DNR |
|||||||
Audio Bit Rate |
16 kbps |
|||||||
Communication Mode |
Full digital |
|||||||
Information Release |
Support to receive and view notifications issued by center |
|||||||
Leave Videos or Text Messages |
Support |
|||||||
DND Mode |
Support to set DND period |
|||||||
Sub-station Quantity |
9 |
|||||||
Alarm Input |
6 channel (switch quantity) |
|||||||
Alarm Output |
1 channel |
|||||||
Network |
1 RJ-45 |
|||||||
SOS Alarm |
Support |
|||||||
Casing |
PC+ABS |
|||||||
Appearance Color |
Appearance Color |
|||||||
Power Supply |
Standard PoE DC 12V 1A |
|||||||
Installation |
Wall mount |
|||||||
Accessories |
Default bracket |
|||||||
Default alarm cable |
||||||||
Dimensions |
119.6 mm × 221.5 mm × 21.5 mm (4.71″ × 8.72″ × 0.85″) |
|||||||
Operating Temperature |
-10°C to +55°C (+14°F to +131°F) |
|||||||
Operating Humidity |
10%RH-95%RH |
|||||||
Power Consumption |
Standby≤4W, work≤6W |
|||||||
Gross Weight |
0.35 Kg (0.77 lb) |
|||||||
Power supply mode |
PoE |
|||||||
Storage |
Support Micro SD, maximum memory capacity 32 G, standard memory capacity 8 G |
Note:
European warehouse POE switches is brown color,
Russian warehouse POE switches is blue color,
There is no difference in quality.