Name: MKS TMC2208
Shipping list
5pcs*MKS TMC2208
5pcs*Heat Sink
TMC2208 is as silent as TMC2100 but it produces less heat. Its max current is 1.414A.
It's high-performance and cost-effective.
Shipping List:
Overview:
Compared to the TMC2100 stepper motor driver module, TMC2208 driver module is with lower heat. The heat of TMC2208 in 0.8A with the equivalent effect of the TMC2100 heat in 0.5A , can be used interchangeably with the TMC2100.
Features:
- Ultra quiet
- Large heat sink,good heat dissipation
- Support uart mode by set jumper caps instead of welding on mks gen_l V2.0,skr1.3/1.4,mks sgen_l.
Parameter:
- Default current:0.88a
- Max current:1.4a
- Logic voltage:3.3v/5v
- Input voltage:4.75v-36v
- Microstep:up to 1/256
- Mode:dir/step,uart
Microstep set:
Microstep setting (doesn’t need MS2) | ||
MS0 | MS1 | STEP |
1 | 0 | 2 |
0 | 1 | 4 |
0 | 0 | 8 |
1 | 1 | 16 |
Driver current regulation:
- Verf measures the voltage of Gnd and potentiometer middle.
- Please DO NOT connect the motors when measuring the voltage, or it's easy to burn the drive.
- Please connect the power supply when measuring voltage as well, do not connect only the USB power.
- Please pay special attention to the direction, do not insert wrongly!
Driver current algorithm:
Notice:
- Pay attention to the connection direction,do not reverse it.
- The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change A4988.
- Dir/step mode used in the printer control board, please pay attention to set the jumper cap MS1 MS2.
Uart mode:
Uart mode can be used on mks gen_l(v2.x),mks sgen_l,skr1.3/1.4 by set jumper cap like below:MKS Sgen_L / MKS Gen_L:SKR 1.3/1.4:
Creativity All of Our's 3D printers and accessories products provide global (custom, design, proofing)
Escrow,T / T in advance, Paypal, Western Union.
If you have any other terms, pls contact us.
Items will be tested before shipment.They will be in good condition.If there are some problems with the items, feel free to contact us.
Please kindly contact us before returning any products. All returns must be made within 90 days from this shipment date. Return must be in new condition(the SAME CONDITION as it was sent to you).
If you don't have an account with any courier, we can help you to prepare the transport on our side and prepay the shipping cost here. We can ship our parts by DHL, UPS, FedEx, TNT and etc. to most places of the world. If you prefer any other shipping ways, please tell us and we'll check if it is available. We will ensure the lowest shipment cost.
When parts arrived at your local custom, if the parts were charged customs duty, we do not responsible for any custom duty or import tax.
All E-mails would be answered within 24hours, Trademanager would be answered within 5minutes.
Please don't be discouraged if your email is not answered during non-business hours.
We are closed weekends, so if you email us on Friday, we may not get back to you until next Monday.
If you have any issues, please CONTACT us before leaving negative feedback, we reply email in 24 hours.
Creativity will make sure give you 100% satisfactory answer. Choosing Creativity is you right choice.