TOPIN T3 T7 Mini Built-in Microphone GPS Tracker SOS Real-time Call Tracking Playback APP for Children Pet Vehicle Car Locator
The PCBA module inside is: ZX303
Our APP Menu interface :
ZX303 only PCBA without battery
Can't use once receive, need to weld a battery on the PCBA by self, like this picture:
PCBA + Battery — Sealed in black heat shrink tube will be :
Other models' links:
ZX303 PCBA :
G03s :
G68 :
G03 :
G12s :
G12p for pets :
Attention:
1.Note: This is 2G GPS Tracker , only support 2G sim card. ( It's said Austrlia,Singapore,Mexico,Canada and USA will stop 2G service since 2017. )
2.The Topin Official Service platform: www.365gps.net
Android application: 365gps
iOS application: 365gps
Login ID: IMEI number, Default Password: 123456
3. QR code scanning access
The client for the Android and iOS phones can be downloaded after the QR code has been scanned.
4. Preparation before use
Check whether the device model is correct and whether the accessories are all in readiness.
Select the SIM card of the GSM network by referring to the advice of your distributor. (Turn off the cell phone first before installing the SIM card)
The GPRS function and the caller ID display function should be subscribed for the SIM card.
Install the APP client onto your cell phone. Please consult your distributor about the detailed information on the APP client.
5. Product function
l Multiple Positioning Mode: GPS+ AGPS+LBS
l Worldwide GSM+GPRS 4-frequency System: 850/900/1800/1900MHz
l Automatic Time Update: Precise GPS time service and no manual time adjustment is needed
l Track: The user's specific location can be inquired through the cell phone APP or the computer
l Fence: Designate an area on the map by setting the device as the center point and the alarm will be triggered off immediately once the user of the device goes into or out of this area
l PlayBack: Inquire the moving routes of the device in the past 3 months anytime and anywhere
l SOS: In case of emergency, press the SOS button and the device will send out the call and message for help to the guardian
l Walk: Counts the steps the user has walked
l Reward: The reward is sent out through the APP on the guardian's cell phone and the reward progress can be viewed
l Find Device: The lost device can be found through the APP on the cell phone
l Alarm: The alarm can set through the APP on the guardian's cell phone
l Anti-disturbance mode: Once the no-disturbance time range is set through the APP on the guardian's cell phone, the device will shield the voice messages and calls
l Voice: With the highly sensitive microphone, the sound around the device can be heard in real time in case the emergency happens to the user
l Remote Power-off: The device can be turned off through the APP on the guardian's cell phone
l Remote Restart: The device can be restarted through the APP on the guardian's cell phone
l Intelligent Power Saving: The device turns off/on the GPS and data upload in the time range specified through the APP on the guardian's cell phone
3. Client operation instructions
3.1 Log in APP
a. Log in the APP by inputting the device IMEI number and password (default password: 123456) manually (please refer to the side of the device for the IMEI number).
b . Input the guardian's name, telephone number and the representative icon.
The guardian 's name/icon will be displayed in the Intercom. The telephone number is the one for remote listening.
The interface is as follows:
3.2 APP function menu
After the login is completed, you can proceed to the main interface of the functions.
The interface is as follows:
4. Function explanation:
(1). Voice:
Set the supervising telephone number and after the confirmation, the device will call the already set telephone number automatically. The sound at the cell phone side cannot be heard at the device side, while the sound around the device can be heard at the cell phone side.
(2). Message:
After the device sets off various alarms, the client will receive the alarm message push and you can enter the information function to view the alarm content.
(3). Track:
View the location of the device in real time.
The location of the device can be displayed at the map interface and the default upload interval of the location information is 10 minutes.
The icon ![]()
represents the base station positioning, the icon ![]()
indicates the GPS positioning. Press the icon ![]()
to change the map mode.
represents the base station positioning, the icon 
indicates the GPS positioning. Press the icon 
to change the map mode.
Press the icon ![]()
to enter the function setting.
to enter the function setting.
(4). PlayBack:
The routes in the past 3 months can be viewed (the green water drop represents GPS, the blue water drop indicates LBS and the purple water drop means WIFI).
(5). Fence:
3 fences can be set and the minimum radius of the fenced area is 100 meters; when the user goes out of the fenced area (into the fenced area), the alarm information about the corresponding area will be generated.
(6).Find Device:
When the device is not by your side, you can send this command toring the device so that you can find the device conveniently; press the Stopbutton the stop the ring.
