2021 New DIY Diamond Painting Keychine Crystal Bear Mosaic Embroidery Rhinestone Full Drill Cross Stitch Gift for Girl Friend Kid
Feature: A white bear model that can be used for graffiti. The design is novel and fashionable.
Specification
Product name: DIY Full Drill diamond Bear
Materilal: PVC
Size: 8cm/10cm High
Packing: white box packing
Color: 20 colors for choose
Drill：2mm Round AB Drill
The production process of the bear body: using high-quality environmentally friendly vinyl technology
Pasting steps:
1. Prepare the bear and the drill tool, the glue is quick-drying, and it should be applied as soon as possible within 2 minutes after application;
2. First apply a small piece of glue to the part, and then use a drill pen to stick the diamonds one by one. Pay attention to the arrangement and do not apply too much glue at a time;
3. Place all points for about 3 hours to ensure that the glue will be firmer after it is fully cured
Note:
The refraction effect of light and the brightness of the diamond may cause visual color difference, but it does not affect the use of the diamond, please rest assured.
Due to logistics restrictions, please bring your own glue. General glue is also available, and special glue (B-7000 model) can also be purchased.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Pasting steps:
1. Prepare the bear and the drill tool, the glue is quick-drying, and it should be applied as soon as possible within 2 minutes after application;
2. First apply a small piece of glue to the part, and then use a drill pen to stick the diamonds one by one. Pay attention to the arrangement and do not apply too much glue at a time;
3. Place all points for about 3 hours to ensure that the glue will be firmer after it is fully cured
Note:
The refraction effect of light and the brightness of the diamond may cause visual color difference, but it does not affect the use of the diamond, please rest assured.
Due to logistics restrictions, please bring your own glue. General glue is also available, and special glue (B-7000 model) can also be purchased.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1. Refer to the comparison table on the canvas to identify each diamond number which corresponds to a printed area on the canvas.
2. Insert the round end of the dotting pen into the dotting cement (push hard, otherwise the cement may fall off).
3. Use the round end to stick a diamond and slightly press down to get the extra cement out.
4. Tear apart the partial film and stick the diamond to the canvas according to the corresponding number.
5. In case of sticking to a wrong place, remove the wrong diamond with a tweezers.
6. After finished, slightly press down diamonds with hand or book to keep them firmly attached.
