Features:
1.with 8 LED Lamp, will be very clearly even at night
2.compatible with DVD automobile navigation
3.170 degree wide angle, find the potential reverse in reality, such as a kids in a blind eye, novice drivers reverse the dilemma, transfer from the car parking area.
4. with CCD core, the video and picture will be more clear
5. waterproof, shockproof and dust proof
6. good quality and longer service time.
Features:
Drill Hole Style Car HD Rear View Camera, gives you a full sight of the back of your car when you are driving
8 LED Infrared Night Vision ensures the car driving safety when backup or parking at night
Helps to avoid incidents, accidents abrasion and ensure your safety
Anti fog glass, CMOS imaging sensor
Support NTSC/PAL video system
With the high sensitivity, you can get rid of the poor rear vision
High definition and up to 170 degrees wide viewing angle
Use high quality Chip to make vivid and clear images
Compact design, easy to install and operate
IP68 waterproof design, shock-proof and anti-jamming functions
Applicable to variety of vehicles: car, truck, RV, etc
Can connect to any type of monitor with a composite yellow RCA jack
Specifications:
Image Sensors: PC1030 1/4 Inch Color CMOS
Sensor Area: 4.08 x 3.12mm
Effective Pixels: 648 x 488 Pixels
LED Quantity: 8 IR LED
Lens Angle: 170 / 135 degrees
Image pipeline feature: Auto exposure, AWB, AGC, Auto ficker detection and cancellation
Video System: PAL/NTSC(Automatic throw-over)
Minimum Illumination: 0.2Lux(0Lux with IR on)
Scanning System: 2:1 Interlace
Resolution : 420TV lines
Electronic Shutter: 1/60(NTSC) / 1/50(PAL)~1/1000s
Gamma Coefficient: 0.45
S/N Ratio: >45.6db
Dynamic Range: > 63.5db
Waterproof Class: IP 68
*Operation Temperature: -20°~ +75°
Storage Temperature: -40°~+85°
Video Output: RCA connector, 1.0vp-p, 75Ohm
Working Power: DC12V
Current Consumption:60mA
Video cable length: Approx 6 m/ 236.2 inch
Power supply cable length: Approx 1.2m/ 47.2 inch
Drill Hole Diameter: Approx 18.5mm/0.73 inch
Camera Dimension: Approx 25*21*18.5mm/0.98*0.83*0.73 inch
How to install ?
1.Use the hole driller to mount the camera at the back of the car (on the license plate back window or other suitable place)
2.Connect the power of the camera to your reverse lights – red wire to positive and black wire to negative.
3.Connect the video cable of the camera to the extension cord.
4.Connect the extension cable to the car monitor.
5.You will see the images when your car is in reverse shift.
Does NOT come with Monitor..
Package including:
1*8 LED round back up camera
1*video cable
1*power cable
1*English instruction
