The Most Cost-effective Analog Camera
XYCING Universal AHD Rear View Camera Fisheye 170 Degree HD Starlight Night Vision Vehicle Backup Cameras Car Parking Camera
Specification:
1. Image Sensor: SV5 AHD
2. like as fisheye.170 degrees diagonal, 150 degrees horizontal
3. Effective Pixels: 1280 x 720 Pixels.
4. Water-Proof: IP68
5. Power: DC 12V
6. Low-light Level Night Vision , 15m visible distance for night .
7. TV Line : 1000 TV Line
8. Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds
9. Video Cable Length: 6M
10. Power Supply Cable Length: 1m
12. ONLY Fit for AHD Monitor or Android player
AHD technologyadopts advanced Y/C signal separation and analog filtering technology, which can effectively reduce color noise in high frequency region and image reduction.
1. AHD's surveillance image quality and the resolution can be equal to the Full HD 1080P level.
2. Zero-delay front-end data is not encoded and compressed to the back end, full real-time, high fidelity.
3. Compatible with ordinary CVBS signals, compatible with analog peripherals (including splitters, matrices, etc.)
4. transmission far from the coaxial transmission of ordinary 75-3 line up to 500 meters
Notes:
1. the AHD camera only supports the AHD Car Monitor .
2. Supports Android 9.1. Android 10.1 Car PC DVD Player .
3. Before buying, please check if the Android player can support AHD.
After installing the camera, you need to open the Android system settings, select the AHD format, and only do this to display the image in Ultra HD format.
1,You have just received the product and the camera does not work after installation
Step 1: Please follow the installation instructions in the picture below to install
Step 2: Please check your radio video format setting options, please choose AHD/25
,
If there is no AHD/25 option, it means your radio does not support this camera
,
Note that this setting interface is different for different models
2. Is the small hole on the back of the camera not waterproof?
The small hole on the back of the camera is a process hole for water-proof glue injection
The internal structure of the camera is like this, so the camera is completely waterproof
3. The camera suddenly stops working after working for a period of time
If the connector is in good contact and the pressure reduction board has no temperature, it means that the camera has been burned out
Solution: equip the camera with a voltage regulator to stabilize the input voltage at 12V
Package included:
1 x Car Rear View Camera
1 x 6M RCA video cable
1 x 1.5M power supply cable
1 x Universal bracket
4 x install screw