433MHz Universal Wireless remote DC 6V~30V 4CH rf Relay Receiver and Remote Transmitter ,for Garage/Light/Door/Home appliance
-
Working Voltage : DC 6~30V
-
Input vlotage : 1~250V
-
Output vlotage : 1~250V
-
Quiescent Current : <5MA
-
Max current : 10A
-
RF frequency : 433MHz
-
Working temperature : -30~+80
-
Receiving Sensitivity : >97dbm
-
Amount of storage remote controls : 25 pieces
-
Support encoding : 1527 Leaning code/2262 fixed code
-
RF Operating mode : ASK superheterodyne wireless reception
-
Receiving range : Open space is more than 50 meters
-
Remote operating mode : Momentary Mode /Toggle Mode /Latched Mode
Wide Range of Uses
Make your life easier
Wide range of application
The right size makes it easy to carry
Super Stable RF Output
Perfect Craft Detail Control
NO : Normal open COM : Common NC : Normal closed
Package include
Receiver module ( include Shell )
Remote Control (include battery )
Product Manual
Wiring Diagram
Operating Mode ,
Description : Press and hold on button “A” , relay will turn on; Release the button, this relay will turn off.
Description : Press button “A”, relay will turn on; Press button “A” again, this relay will turn off.
Description : Press button “A”, relay will turn on; Press button “B”, this relay will turn off.
Set Up
– Set up( Momentary Mode)
1. Press the learning button(on the Receiver)once. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
– Set up( Toggle Mode)
1. Press the learning button(on the Receiver) twice. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
– Set up( Latched Mode)
1. Press the learning button(on the Receiver)triple. Wait for 3 seconds;
2. Press button “A” on the remote control. Wait for 3 seconds.
3. Press button “B” on the remote control. Wait for 3 seconds. Succeed.
– Reset
1,Press the learning button (on the Receiver)8 times. The existing data will be deleted succeed.
Note
1,Reset the receiver before you want to change the operating mode of one remote control.
2, After reset, all the remote controls cannot work any more.
