Description:
feature of product
◆The device supports multiple brands of remote controls, which can be directly generated through the APP brand selection list. Unknown brands can be identified and added through a custom method. (Detailed reference list of supported brands)
◆The equipment supports universal fixed code, learning code copy and generating converter.
◆Remote control distance: Support SUB-1G multi-length (240MHZ-930MHZ), with antenna.
◆Support one-key recognition: Identify the remote control frequency and code type, whether the product supports it.
◆Remote control: The mobile terminal can remotely control the remote control equipment.
◆Support one-key network.
◆Simple remote control management: The segment repeater device can match multiple controllers of different brands, and the APP terminal can delete and rename the remote controllers of different brands.
◆Support power-off memory function: After the repeater and the controller learn once, the repeater does not need to be re-controlled after power off (that is, the repeater and the controller only need to be paired once).
4 Product installation instructions
Use the power cord of this product to connect to the USB female DC5V power plug, and place the product vertically or horizontally on the surface of non-metallic objects. When the power is on, the power indicator (green indicator) is always on. At this time, the device starts normally and you can proceed to the next step.
ØProduct operation and instructions
Touch the button
◆Network access function: Short press and touch the Wi-Fi button three times to enter the network access state; cooperate with the APP user software operation to complete the network access.
◆Remote control test function: Short press the touch button TEST, when the RF transponder sounds once, long press any key on the remote control and approach the RF transponder until the RF transponder beeps three times, indicating that the device supports the addition of the remote control. If the RF repeater beeps for a long time, it means that the device does not support the remote control.
Signal indication
Ø◆Power-on status: the red light is always on.
◆Network status: the green light flashes quickly.
◆Normal working status: the green light is always on when the APP button is pressed, and the red light is always on when the APP button is released.
◆Restore factory configuration/delete device: The green light flashes quickly.
Specifications:
Input voltage:DV5V
Standby power:<1W
Working frequency:WIFI：2.4~2.48GHZ / RF remote：240Mhz~930MHZ
RF remote control power:20dbm
Receiver sensitivity:2kbps,GFSK -121DBM / 40kbps, GFSK, -105DBM 40kbps, OOK, -102DBM
WIFI receiving sensitivity:802.11 b:-91dBm(11 Mbps) / 802.11 g:-75dBm(54Mbps) 802.11 n:-72dBm(MCS7)
WIFI transmission power:802.11 b: +20 dBm / 802.11 g: +17 dBm / 802.11 g: +16dBm
Encryption type:WEP/TKIP/AES
Security mechanism:WAP/WAP2
Working environment:Temperature：-10℃~﹢70℃ / Humidity：5%~93%
Storage environment:Temperature：-20℃~﹢70℃ / Humidity：5%~93%
Dimension:L67.5*W54*H19.5（mm）
Supporting device:Android5.0 /IOS10.1and above
Package Included:
Controller * 1
Charging cable* 1
Notes:
>Note
1. Please do not put the device in a closed corner, and the distance from the device to the router is within
10m to ensure normal oommunication. This can better ensure the stability of the device connection.
2. The device and the phone need to be connected to the same router when the device is added.
3. By pressing the TEST button to test the remote control, each time it is a long beep, check whether the remote control is kept at the required distance from the device, and whether the remote controller used is properly coded.(If the remote control makes a long beep during muitiple tests. the remote control code format device does not support)
4. Can add up to about 100 type remote controls.(Different brands have different data sizes, and the actual quantity is subject to actual addition)
· The remote control that is not needed is deleted as much as possible, leaving room for subsequent addition of the remote control.
The remote control is out of quantity and the remote control cannot be added Need to delete some remote controls and add them.
◆The factory settings are restored on the APP, and all remote control data can be cleared at one time.
5. The add device(device access network) timeout can perform the following checks: Please make sure connecting 2.4 GWIFI equipments. It wil be faled f connect 5G network.
Set SSID hide button to open when adding device, and then configure device network.
· Press the button for 3 times and the green indicator will flash to start the network distribution.
