THINKCAR THINKTOOL Professional Car Workshop Tool
ThinkTool is a modular car auto diagnostic tool from Thinkcar Tech's. it consisting of the host device with a 7″ screen and a variety of functional extension modules, such as a printer, worklight, videoscope, thermal imager, battery tester, scope box, projector, and TPMS sensor. Along with these modules, ThinkTool can accomplish a comprehensive car full system scan diagnosis, coding , Bi-directional activate test and all service reset special functions.
What updates have we made on THINKCAR THINKTOOL 2021 Elite Version ?
1. All-In-One
This pro-level diagnostic scanner combines the advanced ECU Coding,Active Test, TPMS Programming,into one solution, For the cost you’ll get a lot of value.You don't need buy second scanner in the next ten years.
2. Full system diagnose with 30 kinds Service Functions
Electrical Throttle Relearn | Immobilizer/Keys | Inject Coding | Reset AFS | Reset Brake | Reset Oil | Reset SAS | Reset Bleeding etc…
3. Bi-Directional Control / Active Test
Enjoy the easy operation to transmit control commands to operate the vehicle systems, without using the vehicle's controls, to verify system input and output such as: turn on the radiator fan, open & close windows and more.
4. TPMS Programming, Active, Learning
TPMS Programming function: Enable activation, matching, learning and monitoring of tire pressure sensors.
5.Ecu Coding, Online Programming
Re-code changed modules,unfold the hidden features.
6.Anti-Theft,Immo
7. Printer Accessories as a free gift.
You can customized the report tile address, very convenient and efficient. the device also support other accessories, such as WORKLIGHT, THEMAL IMAGER , VIDEO SCOPE. if you need these , please contact us.
8. Lifetime technical support,5 Year Quality Warranty. 365 days no reason free replacement
Car ALL Systems' Diagnoses
Besides classical 4 systems, you are able to use this diagnostic tool to diagnose your car in complete systems, such as Fuel system, Emission system, Body, Powertrain and more electronic systems. You are capable of reading DTCs when there are some issues with your vehicle’s systems, clearing the trouble codes after handling malfunctions. To make sure all the systems performs well, you can view live data stream before driving out.
ECU Coding:
The Coding function is used to re-flash the vehicle control modules .Thinktool automotive diagnostic tool allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.
Thinktool car diagnostic scanner is able to modify the adaptive data for vehicle control modules after repairs or replacements of vehicle parts.
power window
llluminatedentry
warning, light control
slide roof, air conditioner
and more…
Compatibility will differ from specific year and vehicle. Please check compatibility if necessary.
Active Test:
This thinktool bidirectional scan tool request information or command a module to perform specific tests and functions. For instance, in the case of OBD II generic information Mode 1, you can initiate a request for information from the powertrain control module, and the PCM responds by sending the information back to the scan tool for display. In addition, thinktool scanner have the ability to actuate relays, injectors, coils, or perform system tests, etc.
With extensive bidirectional actuate solenoids value and actuators, thinktool bidirectional scanner checks all modules in seconds
the supported control modules are but not limited to:
Operate Mirros
Open/Close the Sunroof
Test Door Lock
Turn on the radiator fan
Sound horn
Test door lock actuators
Turn on interior & exterior lights
more…
Compatibility will differ from specific year and vehicle. Please check compatibility if necessary.
TPMS Programming
TPMS sensor activation
TPMS releam, TPMS sensor program
TPMS system diagnostics
TPMS active test
The function is NOT universally compatible. Please check compatibility if necessary.
Note: Need use THINKCAR TPMS sensor
30+ Special Functions:
ThinkTool can program and code the electronic control system of prevailing vehicle models, also perform special functions, including:
1. Oil Reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset the mileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.
2. Elec.Throttle Adaption
Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.
3.Steering Angle Reset
To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor,replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.
4. Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases
5. ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
6.Break-pad Reset
lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad.Otherwise, the car alarms.
7.DPF Regeneration
DPF regeneration is used to clear PM(Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
DPF regeneration may be performed in the following cases:a) The exhaust back pressure sensor is replaced.
8.Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computer to more accurately diagnose engine misfires. If gear learning is not performed for a car equipped with engine, the MIL turns on after the engine is started. The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine ECu, crankshaft position sensor,or crankshaft flywheel is replaced, or the DTC 'gear not learned' is present, gear learning must be performed.
9. IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car. When the ignition switch key, ignition switch, combined instrument panel,Ecu,BCM, or remote control battery is replaced, anti-theft key matching must be performed.
10. Injector Coding
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
11.TPMS Reset
Note:Cooperate with wireless tire pressure diagnosis tool to realize TPMS activation, programming and learning functions
12. Suspension Matching
This function can adjust the height of the body. When replacing the body height sensor in the air sus pension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.
13 AFS Reset
This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.
14.A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift
15.Sunroof Initialization
This function can set the sunroof lock off, closed when it rains,sliding /tilting sunroof memory function,temperature threshold outside the car etc.
16. EGR Adaption
This function is used to learn the EGR valve after it is cleaned or replaced.
17. ODO Reset
a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do ODO reset after maintenance.
18. Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.
19. Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
20. A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
21. Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
22. NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf theNOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
23. AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
24.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
25.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
26.Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
27.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.
28. Language Change
This function is used to change the system language of the vehicle central control panel.
…….
Basic OBDII Functions
Supports OBD II (on-board diagnostics) protocols. It works with any vehicles after 1996.
Mode 01—Request current powertrain diagnostic data.
Mode 02—Request freeze frame information.
Mode 03—Request emissions-related diagnostic code
Mode 04—Clear/reset emissions-related diagnostic information.
Mode 05—Request oxygen sensor monitoring test results.
Mode 06—Request on-board monitoring test results for specific monitored systems.
Mode 07—Request emission-related diagnostic trouble codes detected during current or last completed driving cycle
Mode 08—Request control of on-board system, test or component.
Mode 09—Request vehicle information.
Mode 0A—Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information.
Multiple Languages
English , German , Spanish , French , Italian , Japanese , Portuguese,Russian
Unique Modular Design
THINKTOOL support below accessories.
Note: these accessories need buy separately .
Advanced Hardware
Operating system: Android 7.0
Memory: 2G
Storage capacity: 32G
Screen: 7 inches, high-definition touch screen with a resolution of 1280*720
Camera: rear 800 megapixel camera
Network connection: Wi-Fi, WLAN 802.11b/g/n
Bluetooth: Bluetooth 4.0
Working temperature: 0℃-50℃
Storage environment: -20℃-70℃
Support more than 10000+ Car Models
Packing List
Version 1: diagnose tablet with printer
1*OBD2 diagnose cable
1* USB cable
1* User's manual
1*US plug
1*Printer
2*Printer Paper
1*THINKTOOL Tablet Scanner
1*Plastic box
Version 2: diagnose tablet with OBD cable
1*OBD2 diagnose cable
1* USB cable
1* User's manual
1*US plug
1*THINKTOOL Tablet Scanner
1*Plastic box
1*OBD Adapter set