Product price question: Since different products come from different suppliers, the price of each product is different
20/24 port：
Description:
Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0, comply with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0.
Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed.
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support AHCI1.0 mode and IDE mode, support native command queue (NCQ).
Support FIS based on port multiplier switch or command switch, support hot swap.
Compatible with SATA 6G, 3G and 1.5G hard drives.
Specifications:
Item Name: SATA3.0 expansion card
Type: 20 ports/24 ports
Color: Green
Interface: PCI-E 16X/4X
Bus interface: PCI-Express x16 slot
Expansion interface: 20/24 SATA 3.0 interfaces
System requirements: There is an available PCI Express X16/4X slot
Operating system: Windows10/8/7 (32/64 bit)/ Vista (32/64 bit)/ XP/2003/2008/linux
Note:
-There might be 1-3 cm error of size for manual measurement.
-The colors deviation might differ due to different monitor settings, please kindly understand.
12/16 port：
Description:
The best effect can be achieved with SATA3.0 data cable.
PCI-E must have a slot above V2.0, and the speed of V1.0 will not exceed 250M.PCI-E, whether X1 or X16 is V2.0 version, can be directly inserted into the X16 slot if there is any spare X16 slot.
Setting of the motherboard BOIS: SATA mode needs to be changed to AHCI. Although some motherboard PCIE is version 2.0, the BOIS does not start the high speed transmission mode by default, that is, Gen2 high speed mode needs to be opened manually.
It is only 200-250M under PCI-E 1.0. 2.0 below 350-400m, if you do not accept it, change the motherboard.
SATA port will slow down when used at the same time. It is not suitable for users who pursue speed, and can only be used for extended hard disk interface.
Specifications:
Product name: SATA3.0 expansion card
Color: Black
Product packaging: Cowhide box
Product interface: PCI-E 1X 2X 4X 8X 16X
Product Specifications:
Comply with Serial ATA 3.0 specification, compatible with SATA2.0 SATA1.0
Comply with PCI-Express V2.0 specification and is backward compatible with PCI-Express V1.0.
Support communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support AHCI1.0 mode and IDE mode
Support for native command queue (NCQ)
Supports FIS port – based multiplier switch or command switch.
Support hot plug
Compatible with SATA6G, 3G and 1.5G hard drives
Bus interface: PCI-Express X1 slot
Expansion interface: 12/16 SATA3.0 interfaces
System Requirements: There is a PCI Express X1 slot available, and support for PCI-E X2 X4 X8 X16
Operating system: Windows10/8/7 (32/64 bit)/Vista (32/64 bit)/XP/2003/2008/ Linux
Note:
– There might be little error of size for manual measurement.
– The colors deviation might differ due to different monitor settings, please kindly understand.
10port：
Description:
Compliant with PCI-Experss
Compliance with Serial ATA Specification 3.0
Bus Type of PCI Express X4 3.0 interface
The supported communication rates are 6.0 Gbps
Hot swap and heat exchange
Specifications:
Itemname: PCIE 4X to SATA Card
Interface: PCI-E 4X (compatible with 4X, 8X, 16X slots, the signal is actually 2X signal)
PCB board color: Black
Interface rate: 6Gbps
2U small chassis: Support, with half-height baffle
Main control chip: ASMedia ASM1166+JMicron JMB5xx
System support: WIN10 LINUX
Note:MSI X470 and X570 are not compatible with this card
Packing list
Package includes:
1 x PCIE 4X to SATA Card
1 x Low Profile Bracket2
10/8/5 port A:
Description:
Support 4 storage modes: The expansion adapter board supports Windows 8.1 64-bit professional version and above systems of desktop computers, forming four soft RAID storage modes.
LED monitor indicator: When the power is on, the red light is always on, the blue light is flashing when reading data, the blue light is always on when not reading data, and the working status of the hard disk is monitored at any time.
Support multiple systems: Multi-system compatible, support hot swap, plug-and-play without driver.
Universal SATA serial hard disk: With 1 to 5 (15PIN to 4PIN) power supply interface cable connected to the power supply of the computer host, the 16TB hard disk works without pressure.
Specifications:
Itemname:SATA3.0 expansion card
Type: 5 Port/8 Port/10 Port/Case(optional)
Model: AC – P1
Color: Black
Size: 120x116x18mm(Excluding the bending part of the baffle)
Input interface: PCI-E X4 slot
Output interface: SATA 3.0
Main control chip: JMB585
Power supply: No additional power supply required
Transmission speed: 6Gbps
Note:
– There are two kinds of package for you to choose from.
– There might be little error of size for manual measurement.
– The colors deviation might differ due to different monitor settings, please kindly understand.
8port：
Description:
Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
Comply with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0.
Compatible with SATA6G, 3G and 1.5G hard drives.
System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16.
Operating system: Windows10/8/7 (32/64 bit)/ Vista (32/64 bit)/ XP/2003/2008/linux.
Support hot swap and hot swap.
Specification:
Product name: 8-port SATA3.0 expansion card
Product model: PCE8SAT-M01
Product master: Marvell 88SE92xx+JMB5XX
Product packaging: cowhide box
Product interface: PCI-E 1X 2X 4X 8X 16X
Bus interface: PCI-Express x1 slot
Expansion interface: 8 SATA3.0 interfaces
Support system: WINXP WIN7 WIN8 WIN10, Ubuntu
Synology can only recognize 4 disks, please know!
About speed description:
1. The best effect can be achieved with SATA3.0 data cable
2. PCI-E must have a slot above V2.0. For V1.0, the speed will not exceed 250M. Regardless of whether it is X1 or X16, PCI-E only needs to be V2.0. If there is a spare X16 slot, just insert it. On the X16 slot,
3. The setting of motherboard BOIS: SATA mode should be changed to AHCI. Although some motherboards PCIE is version 2.0, BOIS does not enable high-speed transmission mode by default (gen2 high speed mode), which needs to be manually enabled. Only 200- under PCI-E 1.0 250M, 350-400M below 2.0
4. The SATA port will slow down when it is used at the same time. It is not suitable for users who pursue speed. It is only used for expansion hard disk interface.
5port：
Specifications:
Item name: Expansion Card
Material: Metal
Color: Black
Size: 12 x 10 x 2cm
Interface: PCI-E 4X 8X 16X
Expansion interface: 5 x SATA3.0 interfaces
Bus interface: PCI-Express X2 Gen3 slot (PCI-E X2 signal, interface is X4)
Supported system: Win7, Win8, Win10, Linux
Note:
– There might be little error of size for manual measurement.
– The colors deviation might differ due to different monitor settings, please kindly understand.
4 port A:
Description:
Accord with PCI-Especification V2.0 and backward compatibility of PCI Express 1XSerial ATA specification 3.0PCI Express X1 interface with PCI Express x4, by 8 and x16 slot are compatible
Support the communication rate of 6.0 Gbps rate, 3.0 Gbps and 1.5 Gbps hotplug and heat exchange
Support the native command queue (NCQ)
Support FIS multiplier based on port of switch or commands.Compatible with SATA 6 G, 3 G and 1.5 G of hard disk drives
Specifications:
Itemname: SATA expansion card
Color: Black
Note:
– There might be little error of size for manual measurement.
– The colors deviation might differ due to different monitor settings, please kindly understand.
4 port B:
Description:
Using master control chip Marvell: 9215, accord with PCI – Experss specification V2.0 and backward compatibility of PCI Express 1. X
In line with the serial ATA specification 3.0, PCI Express X1 interface with PCI Express x4, by 8 and x16 slot are compatible
Support the communication rate of 5.0 Gbps rate, 3.0 Gbps and 1.5 Gbps hotplug and heat exchange
Support the native command queue (NCQ), support FIS multiplier based on port of switch or commands
Compatible with SATA 6 G, 3 G and 1.5 G of hard disk drives
Specifications:
Itemname: PCI-E to SATA3.0 expansion card
Color: Black
Size: 120mm x 85 mm x 67mm
Chip: Marvell 9215
Interfaces: SATA3.0 x 4 (double)
Total interface: PCI – E X1 (compatible X4, by 8, X16 graphics interface)
Product characteristics: Support hot plug and heat exchange
Use case: Size distribution 2 u, chassis are applicable
System supports: Windows 10/8/7 (32/64) (32/64) of the/Vista/XP / 2003/2008 /inux
Note:
– There might be little error of size for manual measurement.
– The colors deviation might differ due to different monitor settings, please kindly understand.
