Multi-function Car Jump Starter C-158 1000A Portable Starting Device Booster Power Bank 12V Car Charger for Petrol Cars
Capacitor starter without battery can be transported by air .
Please Notice:
This car jump starter Only Works For Petrol≤5.0L.
Never try to jump start diesel vehicle, otherwise the circuit board will be burned.
This manual contains important safety and operating instructions. please save these instructions. keep with or near appliance atall times
Precautions
1. Warning- risk of explosive gases
a. Working in the vicinity of a lead-acid battery can be dangerous Batteries generate explosive gases during normal battery Operation.
b. For this reason, it is of the utmost importance that prior to each use of your super capacitor jump starter, you read and follow the tructions provided exactly.
c. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
2. Read the manufacturer's manual for the vehicle being started the manufacturer may have specifc cautions and instructions regarding emergency starting proce dures.
3.Apply the handbrake and select neutral or park before attempting to jump start.
4. Ensure that the ignition switch and all ancillary electrical equipment is switched off.
5. To reduce risk of a battery explosion, follow these instructions and those marked on the battery.
6. NEVER smoke or allow an open spark or flame in the vicinity of the battery or engine.
7. Do not expose the super capacitor jump starter to moisture. heat rain or snow.
8. Do not leave in direct sunlight
9. Use of an attachment not recommended or sold bythe manufacturer may result in a risk of fire, electric shock, or injury to persons.
10. Do not use the super capacitor jump starter unless the battery voltage matches the output voltage rating.
11. Do not operate the super capacitor jump starter in a closed-in area or restrict ventilation in any way.
12. Do not operate the super capacitor jump starter with damaged cord. If the cord is damaged, the appliance should be scrapped.
13. Do not operate the super capacitor jump starter if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a qualified repair station or local dealer.
14. Do not disassemble the super capacitor jump starter .Take it to a qualified repair station or local dealer when service or repair is required. Incorrect reassembly may. result in a risk of electric shock or fire.
15. Referenced jump start testing after full charged for engine capacity 1.6L-30L Max start 13 times. 3.5L-501 Max start 5 times.
16. When not in use, switch off and store in cool and dry place out of the reach of children.
Important Notice: DO NOT use other DC output cordsthan the one supplied or use an extension cords as itcould result in damage to the unit which will not becovered
by warranty.
attention: the appliance has a wrong polarty protection circuitry built in—but as agood practice. never allow the two clampsouch each other.
Operating Instructions:
1. The device is designed for car jump start while running out voltage of car battery.
2. OPERATING INFORMATIONS
a. Cannot start vehicle because of low voltage of car battery,Connects the device to 12V car battery by alligator clamps, red clamp to positive and black clamp to negative, It will transfer all the rest electric power to the device capacities from car battery andindicates CHARGING on device screen. By press START tostartvehicle while indicates FULL CHARGE on device within 10minutes.If not indicates FULL CHARGE after 10 minutes, meansthe car battery is running out of voltage. In this case, Please charge the device via power bank, DC adapter or other car battery,after indicates FULL CHARGE on device screen within 10minutes. Then press START button to start vehicle.
b. lf still can not get it charged for start vehicle from above mentioned operations. Please use backup ways to recharge thedevice such as car battery, power bank, laptop etc.
3. CONTROL PANEL INSTRUCTIONS:
1. POWER ON/OFF:
a. Device full Charged, Press START delays 10S (Red button)button to TURN ON and Hold START delays 1 0S(Red button)button to TRURN OFF.
b. Device will TURN ON automatically under charging, Unavailable to TURN OFF
c. Device will TURN OFF automatically after 30 minutes without operations and power supply .
2. START VEHICLE::
a. TURN ON device and indicates FULL CHARGE, Connect the
Clamps correctly with car battery.
b. Press START delays 10S(red button) button, The device will display countdown in 10S. and after 10S, there will be displayTURN ON NOW . The buzzer will also beep to indicate readyto start engine. During the process of counting down, pressthe START delays 10S (red button) button again to cancel the10S countdown, This humanized design is convenient for oneperson to operate, there is enough time to enter the drivingposition after pressing the button.
c. Press START(green button) to enter the start- -up directly. This
is convenient for two people to operate at the same time.
d. The device will display UNDER VOLTAGE, CHARGE PL .EASE if operating under low battery.
3. LANGuage SETTING:
a. Press L ANGUAGE BUTTON(yellow button) to enter language selecting screen.
b. Select the proper language then press ENTER (bue button) to confirm and EXIT.
When charging by external power source, donot charge the appl iance with 12v and 5 vatthe same time, it will damage the appl .ianceand the external power sol jrces.
Your new super capacitor jump starter is fully protected:
Over Load & Short Circuit Protection- -For overload & short circuit(start procedures are unsuccessful), the appliance generates alert(hurried beep) to warn the user, the ENGINE” symbol wil flash,please check if there is any internal fault or the engine is out of thejump starter 's capability. Once remove the alligator clamps, theappliance will stop generating hurried beep.
Reverse Polarity Protection- -If reverse polarity connected, the appliance generates alert (hurried beep) to warn the user, the CARBATTERY” symbol will flash alternating, please remove alliatorclamps and reconnect correctly. Once remove the alligator clamps,the appliance will stop generating hurried beep.
Over Charged Protection- -If the DC input or the alligator clampsreceive abnormal high voltage from external sources, the appliancegenerates alert (hurried beep) to warn the user, the BAD BATTERY”symbol will 'flash, please remove alligator clamps or DC input sourceand double check to ensure the input voltage is correct. Onceremove the alligator clamps, the appliance will stop generatinghurried beep.
Over Temperature Protection– -If the appliance is used intensivelyor under extreme high temperature, micro-processor controlledelectronic circuitry will prohibit the jump start feature. Please tryagain after a moment or use under suitable environment.
WARNING:
Modern vehicl es contain extensive el ectron-ic systems, it is strongl .y recommended tocheck with vehicl .e manl jfacturer for anyspecific instructions regarding the use ofjump starter.
When charging by external power source, donot charge the appl iance with 12v and 5 vatthe same time, it will damage the appl .ianceand the external power sol jrces.
Your new super capacitor jump starter is fully protected:
Over Load & Short Circuit Protection- -For overload & short circuit(start procedures are unsuccessful), the appliance generates alert(hurried beep) to warn the user, the ENGINE” symbol wil flash,please check if there is any internal fault or the engine is out of thejump starter 's capability. Once remove the alligator clamps, theappliance will stop generating hurried beep.
Reverse Polarity Protection- -If reverse polarity connected, the appliance generates alert (hurried beep) to warn the user, the CARBATTERY” symbol will flash alternating, please remove alliatorclamps and reconnect correctly. Once remove the alligator clamps,the appliance will stop generating hurried beep.
Over Charged Protection- -If the DC input or the alligator clampsreceive abnormal high voltage from external sources, the appliancegenerates alert (hurried beep) to warn the user, the BAD BATTERY”symbol will 'flash, please remove alligator clamps or DC input sourceand double check to ensure the input voltage is correct. Onceremove the alligator clamps, the appliance will stop generatinghurried beep.
Over Temperature Protection– -If the appliance is used intensivelyor under extreme high temperature, micro-processor controlledelectronic circuitry will prohibit the jump start feature. Please tryagain after a moment or use under suitable environment.
Packing list:
1*C-158 unit
1*5V USB cable
1*12V CIG cable
Real photos show:
Cloth Accessories
Bubble cotton accessories