SPEED X
NEW Rotary Vane vacuum pump for Brake Boosters
2 year warranty!
This vacuum pump used in the compact design is a Rotary Vane style pump which is 60% quieter than the noisy “Piston Style” pumps on the market today.
Delivers up to 30″ of vacuum in seconds
This vacuum pump is also 30% more efficient giving you the required vacuum in less time which extends the life of the pump & makes your ride much more enjoyable.
Each vacuum brake booster pump is pre-wired and tested on the assembly line to ensure a trouble-free and easy installation. Installation is a breeze with a 2-wire power hookup and base-plate mounting template.
“Plug and Play”
-
Ideal for vehicles with low vacuum such as supercharged, turbocharged or big cam engines
-
Can be mounted under the hood or inside the car
-
Efficient, quiet & vibration-free
-
Rotary Vane style pump with is 60% quieter
-
30% more efficient
-
Pre-wired and tested
-
2-wire power hookup and mounting template for an easy installation
Applications:
-
Universal including Cars, SUVs, light trucks, minibuses, diesel vehicles and other fuel vehicles (as the auxiliary brake mechanism) and electric vehicles
-
Pump : UP 50 1off
-
2 L STAINLESS TANK 1off
-
MOS Pressure control 1off Noted: No need switch and relay.
-
1 METER VACUUM PIPE 1 off
-
Mounting braket 1off
-
T-pipe 1off
-
check valve 2off
-
ACC POWER PLUG 1off
-
Adjust stainless Clamps 12 off
Instruction:
1. The vacuum pump and vacuum pipe should be installed in the engine compartment, preferably far away from the engine and close to the booster;
2. Installation of vacuum pipeline: there are two interfaces on the vacuum tank, one is connected to the vacuum pump with a hose (this end needs to be connected to a check valve), the other is connected to the engine intake manifold with a three-way pipe (if there is no check valve in this end of the hose, it needs to be connected to one) and the booster;
3. Circuit installation: the controller on the vacuum tank has two plugs, one is connected to the vacuum pump, the other is connected to the 12V DC power switch (connected to ACC);
4. (Note: this plug can not be directly connected to the power supply. If the car goes out, the vacuum pump will work without power off, consuming the power in the battery.)
5. Congratulations on completing the installation!
Pictures: