LED Turn Signals Indicator Motorcycle Flasher Built Relay Arrow Motorcycle Turn Signals Light Motorcycle Light For Honda Yamaha
FAQ: turn signal light can not flowing to the end ?
⚠️1. Remove our turn signal light from your motorcycle.
⚠️2. Just connecting with 12V power to test our turn signal light;
⚠️3. If our product can work well by connecting with 12V power, that means your motorcycle already installed Halogen relay.
⚠️4. Please remove the Halogen relay, since our product is LED turn signal light. It can not work with Halogen relay.
【 Mode A 】
Arrow LED Flowing Turn Signal Light
Features:
1. Long lasting,low power consumption,energy saving.
2. Universal fit all the motorcycle.
3. 12V for DC power supply.
4. Bolt size: fit most of models with 10mm bolt
5. 12 high-brightness LED chips, dynamic flow or static constant brightness
Specifications:
Product Name: Motorcycle Turn Signal Light
Material:Plastic + Metal
LED Light Model: Flowing Water
Light Color: Amber
Light source: LED
Mounting Position: Front & Rear(Left & Right)
Usage: Motorcycle Indicator/Turn Signal
Voltage: DC 12V
Power: 1W
2/4pcs in one package, easy to install, not included instruction.
Fitment:
Universal for most 10mm bolt motorcycle, such as motorbike scooter quad cruiser, Harley, Kawasaki, Yamaha,Suzuki off road Harley ets
01. Flowing Mode Performance
– Water flowing design, can remind others very well even in the crowded street, drive safely
– Amber Color Light with Blendable Design, Flowing Mode Makes The Motocycle More Upscale and Higher Retention
– High performance.
– High brightness.
– Low power cinsumption.
02. Longer, More LED Light Distribution
– 12 pieces High quality 2835SMD LED bulbs
– Longer LED board, make the light so bright
– Selected super bright imported LED light source, the energy saving level is far superior to traditional lighting products, with high brightness, low heat generation, low energy.
03. Super Brightness
-Built-in 2835 Side Light Beads, High Brightness, Low Power Consumption
– 12 pieces high quality LED bulbs, shine greatly
– Longer LED board, make the light so bright
– Can specify direction clearly, drive safely
04. Built-in LED Flash Relay
– Universal for Most 99% Motorcycles
– Plug to play with most motorcycles
05. IP65 Water Resistance
– Fine Workmanship, Wear-resisting and Shockproof
– Material in Durable and Waterproof Plastic, Make it Resistant to Water Damage, Work Normal in the Rain or Harsh Environments
06. Porduct Details
– Turn Signal Lamp Shell is ABS Matrial Handle with High Flexible Rubber, Curved High, Which Can Effectively Prevent Accidental Falls
– fit most of models with 10mm bolt, Can be installed easily
07. Porduct Parameters
– Approx 117mm*21mm*15mm.
– Mounting Bolt Thread: 10mm, Universal Compatible with Harley, Kawasaki, Yamaha,Suzuki off road Harley ets
08. Easy To Install
Connection:
–Direct Bolt-on with 2 Wires Connecting.
–The black line is the negative pole
–the red line is the positive pole.
09. Bendable Flexible Rubber
– Can protect the light from the collision, do not worry about collision damage
– Handle with High Flexible Rubber, Curved High, Which Can Effectively Prevent Accidental Falls
10. Installation Shows
Amber Color Light with Blendable Design, Flowing Mode Makes The Motorcycle More Upscale and Higher Retention
【 Mode B 】
Double Side Light Turn Signals
Specfication:
Usage: Running, Braking light and Turn signal lights
Body Color: Black
Lens Color: Smoke
Front Light Color: Amber
Back Color: Blue LED
Working voltage: DC 12.8 V
Mounting Bolt Thread: 10mm
Applicable Models: 12V Motorcycles
Bulb Type: LED, High Lumens Output and Long Life Span
Size: (As photo shown)
Length Of Cable：26.5CM
Wiring: 3 Wires Set Up
Package Included:
2/4PCS Flowing Turn Signals Light
【 Mode C 】
E11 Mark Turn Signal Light
Notice :
⚠️ Model C with E11 mark turn signal light is Yellow cover !
Features
1. Waterproof, Durable, Low temperature, low power consumption, high performance indicator.
2. Built-in LED flash relay with 50-120 times/min, Plug to play for most motorcycles.
3. With bendable rubber, more durable.
4. Update novel design, ECG waveform double-sided flowing water turn signal.
5. WIth E11 mark certification
Description:
– 335SMD LED with high brightness, low light failure, stable performance and long life, low heat and low power consumption.
– Flowing Water turn signal, totally new and fashion model.
– High toughness bendable rubber to prevent accidental falls effectively.
– Plug to Play, provide 12v power to get flowing effect directly.
– Built-in decoder, compatible with most kind of LED Flash relay.
Specifications:
1.Product name: Emark flowing water turn signal
2.Light source type: LED
3.Lamp beads type: SMD chip lamp beads
4.Number of lamp beads: 12
5.Shell material: Engineering plastic
6.Lens material: PC
7.Lamp base material: Soft rubber
8.Shell color: Black
9.Lens color: Smoked yellow
10.Working voltage: 12V
11.Power: 3W
12.Current: 0.25A
13.Screw size: 10MM
14.Front light color of turn signal: Yellow light
FAQ:
1. Why i can not get flowing water effect or just get 3LEDs or 6LEDs light up?
– Because this is LED turn signal light, please make sure your original flash relay is LED flash relay, not a halogen flash relay
(if you never exchanged flash relay, then the original flash relay is halogen flash relay )
– If you already installed LED flash relay, please check the frequency band of it. our turn signal light just can work with 50-120 times/min, you can try other LED flash relay with same 50-120 times/min.
2. Why the Turn signal can not turn on when connect with motorcycle?
– please make sure the input voltage is 12V and it's stable. And you connect the turn signal light with turning circuit.
– if still can not light up, please connect our turn signal light with 12v battery directly to check with it.
