433Mhz Wireless Smart Switch,working with Wall Panel Transmitter,ensures a better user experience of switch,providing your smart life with much more convenience and enjoyment.
By GERMA
Notice:The package Included different products because
you choose a different options.
Product Features:
1.Multi-Functinal Switch:One Wall Panel Remote Transmitter Switch is able to control multiple RF433 Relay Receivers,and multiple Wall Panel Remote Transmitter Switches can also control one RF Relay Receivers at the same time.Stick the switch with the double-sided tape include.(About switch:different choices of colors,luminous type,or with a touchable button on the switch,2Gang/3Gang optional)
2. No WiFi to Control:With a battery in the Wall Panel Remote Transmitter Switch,you are able to control the devices connected to the RF433 Relay Receivers without Wi–Fi,as long as there is sufficient battery voltage.
3.Customer Protection:60 days refund guarantee and return for any reasons within 15 days.ce,CCC ,RoHS Listed.
4.Attention:The RF433 Relay Receiver and the Wall Panel Remote Transmitter Switch must be used together,so you can’t buy one receiver or one switch alone.
5.Contact Us:If you have any questions,please contact us without hesitation,and we are willing to provide you with the best service to satisfy your need.
Technical Data Of Wall Panel Transmitter:
Operating Frequency: 433MHz.
Battery Model: CR2032 Alkaline Battery (Package Not Included Battery) .
Material: HDPE(Type2) Plastic.
Coding Specification: 1527.
Distance: Indoor (20 Meters/65 Feets) , Outdoor (80 Meters/262 Feets).
Color: White , Silver, Gold, Black.
Size(L/W/H): 86mm x 86mm x 13mm.
Weight: 60g/2.1ounces.
Technical Data Of 433mhz RF Receiever:
Model Number: KR2201D-4.
RF Frequency: 433MHz.
Input Voltage: AC 90V~250V.
Modulation Mode: ASK.
Remote Storage: 25pcs.
Wiring Type: Fixed Terminal.
Encoding Type: Intelligent Learning Code.
RF Working Mode: Superheterodyne Reception.
Working Mode: Momentary, Toggle and Latching.
Remote Control Range: >50m (Free Space).
Color: Green(PCB Board), White (Outside Shell).
Package Size: 8.2 * 4.2 * 2.5cm/3.22 * 1.65 * 0.98in.
Package Weight: 55g/1.94oz.
Note : This Product NO WIFI Function. Only RF 433Mhz Function.
How to install this smart switch:
You don’t need to open the outer casing of this smart switch. You can wire directly to the terminal block. Please note: Please turn off the power before wiring. Please connect the wires according to the following diagram.
About Working Mode:
Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects. Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects . Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Receiver Code Resetting/Clearing:
Push the learning button on the receivers 8 times, the codes will be cleared. After clearing the code, all the remote controls need to be re-paired in order to control the receiver again.
Learning The Code (Momentary):
Press the learning key once, the LED on the Receiver will flash once. When the LED switches on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off. Indicates that they are successfully paired.
Learning The Code (Toggle):
Press the learning key twice, the LED on the receiver will flash twice. When the LED switch on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off. Indicates that they are successfully paired.
Learning The Code (Latching):
Notes: Latching mode require 2 different buttons, the first one for “ON”, the second one for “OFF”. For example: button A = ON, button B = OFF. Push the learning key on the receiver 3 times, initiate latching mode setting. Wait for a moment, the LED indicator on the receiver will flash briefly and switches off. Push the remote button A, LED flashes 5 times. Push the remote button B. LED flashes 5 times. 3 seconds later, the LED indicator will switch on again, indicates that the remote control and the receiver are successfully paired. A = ON, B = OFF.
Instructions:
The first step: Clear the receiver’s memory Press the Learning Button on the receivers for 8 times, the codes will be cleaned. After cleaning the code, all the remote control can not work any more.
Step Two: Match Wall Panel Remote Transmitter and Receiver Press the learning key on the receiver twice time, it comes into toggle setting mode. Wait for a moment, the LED will be on , it comes into learning state. Press the remote button, LED indicator on the receiver board will flash then come off. Learning successfully.
NOTES:
1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient (when the battery voltage is insufficient, generally get close transmitting).
3. Please pay attention to avoid metal mask,large equipment,strong interference electromagnetic filed when using wireless RF products, and avoid too short distance between the remote control and receiver board.
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe.
Q&A:
1.Q:Can I control the devices normally with little battery voltage?
A:Not yet.When the battery voltage is insufficient,generally get close transmitting.So promptly change battery,please
2.Q:Can a 3 Gang Wall Panel Transmitter Switch control three different devices connected to the receivers in different places?
A:Yes,a 3 Gang switch can control different devices apart,although one is upstairs,and another is downstairs.
3.Q:Do I need to make a hole to install the switch?
A:No, there is no need.You just need a double-sided tape to stick it anywhere you like.
4.Q:Does this work with Google Home?
A:No,it doesn‘t.This kind of receiver can‘t work with Wi-Fi,it only supports remote control within the prescribed scope via the Wall Panel Transmitter .
5.Q:How to install?Is a c-wire required for the switch?
A:Install the receiver where the device requires,and then control the device through our switch.No c-wire required for the switch.
