Software //github.com/SpacehuhnTech/esp8266_deauther
Hardware //github.com/lspoplove/Deauther-Project
WiKi //github.com/SpacehuhnTech/esp8266_deauther/wiki
FAQ //github.com/SpacehuhnTech/esp8266_deauther/wiki/FAQ
Burning tutorial //github.com/SpacehuhnTech/esp8266_deauther/wiki/Installation
Burning tool //github.com/nodemcu/nodemcu-flasher
Firmware download //github.com/SpacehuhnTech/esp8266_deauther/releases
Quick product upgrade tutorial:
1. Download CP2102 driver (//www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
2. Download the firmware (//github.com/SpacehuhnTech/esp8266_deauther/releases)
3. Download nodemcu-flasher (//github.com/nodemcu/nodemcu-flasher)
4. Click the gear to select the corresponding binfile. The programming mode selects DOUT. The rate selects 961200. Click Flash start and wait for the progress bar to reach the end and then power on again
Detailed tutorial:
Link: //pan.baidu.com/s/1SWpqicQh5WGcdbg1nwEIwg Extraction code: 68fh
What is it:
Deauther Watch is still an ESP8266 development board, but you can wear it like a smart watch.
I provide 3D print case only for Deauther Watch.
But I do not provide case for old Deauther Wristband.
3D Print Case Download:
//github.com/lspoplove/Deauther-Project/blob/master/3DPrint/DeautherWatch.STL
Assemble Video
It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit here.
//github.com/spacehuhn/esp8266_deauther
You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
GPIOs and hardware info
Display SH1106 1.3 OLED
Display SDA GPIO 5 (D1)
Display SCL/SCK GPIO 4 (D2)
WS2812b LED GPIO 15 (D8)
Button Up GPIO 12
Button Down GPIO 13
Button Select GPIO 14
High Light LED GPIO 16
Side Button GPIO0 GPIO2 RST
Please use computer to see more details
Why did you make it?
I designed this development board especially for Spacehuhn’s great project:ESP8266 Deauther. It has been authorized by him and is officially supported.
Thanks to every customer that leaves feedback! I will keep improving this board.
What makes it special?
-
Only ~80mA power usage
-
Up to around 3-4 hours work time
-
500 mA charging curren
-
Included 5dB FPC antenna and 2dB antenn
-
Protection: short, overcharging, over discharging, temperatur
Disclaimer
Use it only for testing and educational purposes against your own devices! I don’t take responsibility for what you do with it.
Please check the legal regulations for your country to make sure you don’t violate any laws.
You can get full information fromWiKi
Deauther Watch V2 fixed all the problems I collected. Now hardware has RTC but software will update later. ESP32 does not support deauther.
Update Log
Update Log
Difference |
Deauther V1 |
Deauther Watch V2 |
Deauther Watch V3 |
Battery |
500mah |
800mah |
800mah |
3D Print Case |
YES |
YES |
YES |
Screen Protection |
NO |
YES |
YES |
Battery Indicate |
NO |
YES |
YES |
Power Switch |
Plastic |
Metal |
Metal |
Charging Current |
0.5A |
0.8A |
0.8A |
RTC DS3231 |
NO |
YES |
YES |
Breakout GPIOs |
NO |
YES |
YES |
Color |
Black |
Black&White |
Black |
Laser |
NO |
NO |
YES |
Work Time |
3-4h |
7-8h |
7-8h |
Weight |
50g |
61g |
78g |
Size(LxWxH mm) |
48x39x17 |
55x50x19 |
60x55x22 |
What is it?
Deauther Watch is still an ESP8266 development board, but you can wear it like a smartwatch.
This ESP8266 development board comes with a 800mAh battery, OLED display and a 3-way momentary slide switch.
It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visithere.
You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
GPIOs and hardware info
-
Display: SH1106 1.3″ OLED
-
Display SDA: GPIO 5 (D1)
-
Display SCL/SCK: GPIO 4 (D2)
-
WS2812b LED: GPIO 15 (D8)
-
Button Up: GPIO 12
-
Button Down: GPIO 13
-
Button Select: GPIO 14
-
High Light LED: GPIO 16
-
Side Button: GPIO0,RST
Why did you make it?
I designed this development board especially for Spacehuhn’s great project:ESP8266 Deauther. It has been authorized by him and is officially supported.
Thanks to every customer that leaves feedback! I will keep improving this board.
What makes it special?
-
Only ~80mA power usage
-
Up to around 8-10 hours work time
-
800 mA charging current
-
Indicate charging LED (25%,50%,75%,100%)
-
Included 5dB FPC antenna and 2dB antenna
-
Power Switch (Click to turn on, double click to turn off)
-
Protection: short, overcharging, over discharging, temperature
-
Added Extremely Accurate DS3231
Disclaimer
Use it only for testing and educational purposes against your own devices! I don’t take responsibility for what you do with it.
Please check the legal regulations for your country to make sure you don’t violate any laws.
You can get full information fromWiKi
Scehmatic and 3D Print Design files