Kit Content:
1xPipeVape Device
1x1000mah battery
1xUSB charger;
1xCleaning Brush
1xDab Tool
2xSilicon Rings
1xUse Manual
Specifications:
1.Battery: 3.7V 18350 Li-poly.
2.Temperature Range:300℉-435℉/149℃-224℃ adjustable,can circulate,memory function..
3.Lock/Unlock:press 5 times consecutively.
4.Charging Time:1-1.5hours.
5.FPC Heating Resistant/MAX Power:0.6Ω, 30W
6.Heating Chamber:Ceramic heating chambe
7.Material:Environment durable PPS+PC
8.Safety Power Duration:5 minutes.
8.Airflow tech:isolate airflow
9.Working Times:about 7 times with full charge.
Temperature Control Settings:
1)The PipeVape is capable of reaching any temperature within the ranged of 300-435℉/149-224℃.
2)By holding the power button for 3 seconds,you can alternate between Celsius and Fahrenheit temperature.
3)Press the power button 3 times consecutively,you can setting the heating time(working time).The desired heating time is 3-9 minutes,30 seconds a grade to increase or decrease,,the acquiescent time is 5 minutes.The device will start to work after setting the desired working time for 3 seconds.
4)USE the +/- buttons on the device,you can increase or decease the desired temperature while the device is heating, 1℉ or 1℃ is a grade,the temperature adjust can be circulate (it will back to 300℉ when the temperature increased to 435℉and keep press + button;it will back to 435℉ when the temperature decreased to 300℉ and keep press – button).
5)The device comes equipped with a built in memory function,and will automatically heat to the most recent temperature selected when turned on.
OLED Display:
1)Battery Power,Setting Temperature,Setting desire Heating Time,and Left heating time,The heating temperature.
2)Battery Low: OLED Shows “LOW voltage”
3)Temperature Check Malfunction:OLED shows “CHEEK NTC”
4)Heating chamber Checking Malfunction:OLED shows “CHEEK FPC”.
How to Use the PipeVape:
1)To turn on the device,press the power button 5 times in rapidly succession.
2)When turned on,the device will begin heating according to your last time use temperature.
3)You are allowed to setting the desired temperature and desired heating time.
4)While heating,the pipe image on the display will flash, to indicate is heating up.
5)Once the desired temperature is reached,the device pipe image will display a solid non-blinking to indicate the device is ready to be used.
6)After 5 minutes consecutively work,the HOMLES will automatically shut down. This is the device’s safety power duration. To start your next session,simply repeat the process outline on this page.
7)To turn off device, press the power button 5 times in rapidly succession. The system will automatically shut down too when meet breakdown.
1* Beautifully packaged box