10 x Extra AFC insert :0.8mm/1.0mm/1.5mm/2.0mm/2*0.8mm/2*1.2mm/2*1.5mm/2*2.0mm/3*0.6mm/3*0.8mm
1.2mm AFC insert Already installed in the atomizer, so it is 11pcs
The atomizer comes with 1.2mm AFC insert
Dvarw MTL fl RTA(kit)include:
10 x Extra AFC insert :0.8mm/1.0mm/1.5mm/2.0mm/2*0.8mm/2*1.2mm/2*1.5mm/2*2.0mm/3*0.6mm/3*0.8mm
1.2mm AFC insert Already installed in the atomizer, so it is 11pcs
The atomizer comes with 1.2mm AFC insert
2 x Extra cup 2.0ml/5.0ml
The atomizer comes with 3.5ml cup
1 x Dvarw MTL fl RTA
1 x 510 Drip Tip
1 x Spare Parts Pack
dvarw mtl fl RTA atomizer
Material: 316 stainless steel
Dvarw MTL fl RTA(sinlg rta)–3.5ml
10 x Extra AFC insert :0.8mm/1.0mm/1.5mm/2.0mm/2*0.8mm/2*1.2mm/2*1.5mm/2*2.0mm/3*0.6mm/3*0.8mm
1.2mm AFC insert Already installed in the atomizer, so it is 11pcs
The atomizer comes with 1.2mm AFC insert
The atomizer comes with 3.5ml cup
1 x Dvarw MTL fl RTA
1 x 510 Drip Tip
1 x Spare Parts Pack
dvarw mtl fl RTA atomizer
Material: 316 stainless steel
Dvarw MTL fl RTA(sinlg rta)–5.0ml
10 x Extra AFC insert :0.8mm/1.0mm/1.5mm/2.0mm/2*0.8mm/2*1.2mm/2*1.5mm/2*2.0mm/3*0.6mm/3*0.8mm
1.2mm AFC insert Already installed in the atomizer, so it is 11pcs
The atomizer comes with 1.2mm AFC insert
The atomizer comes with 3.5ml cup
1 x Dvarw MTL fl RTA
1 x 510 Drip Tip
1 x Spare Parts Pack
dvarw mtl fl RTA atomizer
Material: 316 stainless steel
Dvarw MTL fl RTA(sinlg rta)–2.0ml
10 x Extra AFC insert :0.8mm/1.0mm/1.5mm/2.0mm/2*0.8mm/2*1.2mm/2*1.5mm/2*2.0mm/3*0.6mm/3*0.8mm
1.2mm AFC insert Already installed in the atomizer, so it is 11pcs
The atomizer comes with 1.2mm AFC insert
The atomizer comes with 3.5ml cup
1 x Dvarw MTL fl RTA
1 x 510 Drip Tip
1 x Spare Parts Pack
dvarw mtl fl RTA atomizer
Material: 316 stainless steel
They reduced the height of the atomizer with the same size (small / medium / large) compared to the old one, by 1.5mm, this they did by thinning the upper part where the drip tip is housed, it goes without saying that however, the 24mm has more capacity.
– They put 2 pins on the sides of the wire tightening screws to help secure complex wires.
– They have reduced the thread that connects the tank to the deck, this has not reduced the overall size of the atomizer but they have made sure that it can be filled more, in essence now you don’t need to use the trick of the straw to make us stay more liquid as it was done with the old man. (Basically when you bring it straight it will be full to the brim, with less air in the upper part of the tank)
– The bell now has an established position, so you cannot put the feeding holes where you want, it will have a hole that will allow a single preset position.
– A glass tank both 22 and 24mm flush will be available, so not like the old one that overflowed with 1mm, the latter tank will probably be made available (There was a survey) also for the old version of the dvarw MTL .
I should add that a part of the bell is now made of peek, at least in the 24mm, to be seen for the 22mm
Very appreciated the idea of the air pin without hole to be able to drill it at will, even if the choice is so wide that I doubt it serves:
Note:
1. We are working hard and smart to fulfill your requirements. But if you have any problem when receive the parcel, please contact us by message or Trade Manager. We will get back to you in 24 hours and work with you until you are satisfied. Please DO NOT open dispute before communicate with us.
2. Upon delivery, please check your parcel before signed it. If you find the parcel is abnormal, you can refuse to sign and contact us.
Shipping:
1. Orders will be shipped within the processing days after payment verification. To protect both the buyers and the sellers, it may take 24 hours for AliExpress to verify the payment.
2. We only ship to confirmed order address. Your order address MUST MATCH your shipping address.
3. Free shipping for all items, for some countries, you may pay extra shipping cost. The delivery time is 30-45 days. If you need fast shipment, please contact us.
Return Policy:
1. All returned items MUST BE in the original condition.
2. Buyer pays return shipping cost.
Feedback:
1. if you are satisfied with our products, we sincerely hope that you can leave us a all POSITIVE FEEDBACK. Meantime, we’ll aslo leave you positive feedback.
2. Of course,for any reasons, if you are not satisfied with our products, please contact us before leaving neutral or negative feedback. We will get back to you within 24 hours, and help you to solve problems.
Airflow Inserts
A unique ball bearing detent system allows the Airflow Inserts to lock securely into place with a satisfying *click*, with an added feature of this insert also acting as the chamber reducer to minimize any dead space for better flavour and vapour compression and production for a warming tasting vape.