433MHz Universal Wireless Remote Control AC 110V 220V 10Amp 2200W 4CH Relay Receiver Module RF Switch for Gate Garage opener
*** Tips:If you need us to set up the operating mode , please leave a message on the order ***
Product Application Area
Remote control garage door Remote control house door Remote control Lamp Remote control curtains Remote control Gate and other remote control device
Package include
Receiver module( include Shell )
Remote Control (include battery )
Product manual
Technical Data
Electronics Character:
- Working Voltage:AC 85V~250V
- Input Voltage:1V~250V
- Output Voltage:1V~250V
- Max current : 10Amp
- max load: 2200W
- Quiescent Current:5mA
- Working Frequency:433Mhz
- Receiving Sensitivity:-104dBm
- Function option:Momentary/Toggle/Latched
- Modulation Mode:ASK
- Matching Mode: Intelligent Learning code
- Output Mode:Dry contact /Voltage output
- Shell:Yes
- Working temperature : -30~+80
- PCB dimension:68.2×48.2(mm)
Pin functions:
- +V :Positive pole input
- GND :Negative pole input
Relay 1/2/3/4
- 1. Normal Closed of relay (NC)
- 2. Common of relay (COM)
- 3. Normal Open of relay (NO)
Products Display
Tips:
All of our products are of high quality! If you have other needs, please feel free to purchase them in our store.
Circuit Connection modes
Please Note:
the Receiver Switch Module have 3 ways of working mode.The OUTPUT signal has 2 Voltage Level. It decided by the INPUT of the COM pin.
NOTES
1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient, (when the battery voltage is insufficient, generally get close transmitting )
3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wireless RF products,and avoid too short distance between the remote control and receiver board .
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe .
Operating Mode
You can match the Remote Control with the Receiver Switch Module in 3 modes.
- Remote mode 1: Momentary Mode
Press and hold on one button -> ON; Release the button -> OFF
Details:
Press one button (on the remote control) , the relay (on the receiver board) turn to switch-on ;
Release the button, the relay turn to switch-off.
- Remote mode 2: Toggle Mode
Press one button -> ON; Press the same button again -> OFF
Details:
Press one button (on the remote control) once , the relay (on the receiver board) turn to switch-on ;
Press the same
button
again
, the relay turn to
switch-off.
button
again
, the relay turn to
switch-off.
- Remote mode 3: Latched Mode
Press one button “A”-> ON; Press another button “B” -> OFF(another relay turn to switch-on)
Details:
Press one button “A”(on the remote control) once , one relay (on the receiver board) turn to switch-on ;
Press another
button “B”
once
, the relay turn to
switch-off(At the same time another relay turn to switch-on
)
button “B”
once
, the relay turn to
switch-off(At the same time another relay turn to switch-on
)
Set Up
– Part 1: Delete the existing data about remote mode
Note:
When you receive our products, it maybe set in one remote mode randomly, that because each product got test when it can be arranged to shipment.So, please delete the existing data about
remote mode
for the first application.
When you receive our products, it maybe set in one remote mode randomly, that because each product got test when it can be arranged to shipment.So, please delete the existing data about
remote mode
for the first application.
Press the learning button on the Receiver Switch Module board 8 times , the existing data are deleted successfully.
After deleted the data, all the remote control cannot work any more.
– Part 2: Set up the Remote Mode
Remote mode 1: Momentary Mode
- STEP 1
Press and release the learning button on the Receiver Switch Module board once.
Wait for a moment , the LED will turn off , indicating you entered the learning state.
- STEP 2
Press and release one button on the
Remote Control
, the LED on the receiver board will flash on then off indicating the button was learned.
Remote Control
, the LED on the receiver board will flash on then off indicating the button was learned.
Wait 3 seconds, the LED will turn on again, indicating system is ready for use.
Remote mode 2 :
Toggle Mode
- STEP 1
Press and release the learning button on the Receiver Switch Module board twice.
Wait for a moment , the LED will turn off , indicating you entered the learning state.
- STEP 2
Press and release one button on the Remote Control, the LED on the receiver board will flash on then turn off ,
indicating the button was learned.
indicating the button was learned.
Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use.
Remote mode 3 : Latched Mode
- STEP 1
Press and release the learning button on the Receiver Switch Module board triple.
Wait for a moment , the LED will turn off , indicating you entered the learning state.
- STEP 2
Press and release one button
on the Remote Control,
the on-board LED indicator will flash 5 times to inform that the setting of latched mode successful .
on the Remote Control,
the on-board LED indicator will flash 5 times to inform that the setting of latched mode successful .
Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use.
On this products details page, there is a demonstration video available.
*If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*
