22pcs BDM Adapters Full Set BDM Frame for KTAG KESS FGTECH BDM100 Probe Adapters LED ECU RAMP Chip Tuning Tool
BDM FRAME with Adapters Full Set
1. BDM FRAME with Adapters Set made from hight quality Plexiglass.
2. BDM FRAME with Adapters Set can be used on ECU Chip Tuning Tool Such
As BDM100 programmer, CMD, Fgtech , Kess, Ktag…
3. BDM FRAME Fit Both Original FGTECH And Not 100% Original FGTECH
Top Reason to Get BDM FRAME
100% brand new.
Item size: like the picture show.
BDM Frame with Adapters Set for FGTECH BDM100 CMD etc.
This BDM FRAME with Adapters Set is made from high quality.
Plexiglass , it can be used on FGTech BDM100 CMD Ktag Kess V2 etc.
Please Note :This is only bdm frame, it use for ktag ECU programmer tool. if you want the ktag ecu tool, please tell us, this product don't include k-tag product.
How to Install the BDM Frame Full Set?
LED BDM FRAME
This LED BDM FRAME is best bracket For ECU Update/ECU Brush And Write/ECM Modified and programming / Probe holder / Dimsport aids. It is much better than the old bdm frame.
It is best used for KTAG, KESS, KTM100, FGTECH/BDM100/CMD/DIMSPORT ect… ECU Chip Tuning Tools.
Easy installation and operation, no hurt the ECU circuit board.
Function
For Car rush,modify,programming bracket stand.
Fits for ECU brush&write,ecu modified&programming.
Probe holder,dimsport assistant.
Material
Aluminum alloy stand
Arcylic board, mesh assistant
No PCB Adapters inside package!!! LED works for 12V. Once you connect with probe,then you disconnect 12V battery for LED, it will works.The probe pin is adjustable.
22pcs BDM adapters Features
Adapter width: ~60mm width for original BDM Probe, not for low quality plastic with 40mm width.
Adapter thickness: 2mm
Adapter colour: Green
Package includes
1 14AM00T01M for Bosch
2 14AM00T02M for Dlphi DCM
3 14AM00T03M for Bootloader ST10xx
4 14P600KT04 for Tricore EDC/MED17
5 14AM00T05M for Marelli MPC55xx JTAG
6 14AM00T06M for Dlphi MPC55xx JTAG
7 14AM00T07M for Denso CN1 Boot
8 14AM00T08M for Denso CN2 Boot
9 14AM00T09M for Denso CN3 Boot
10 14AM00T10M for Denso CN1 AUD
11 14AM00T11M for Denso CN2 AUD
12 14AM00T00M for Dlphi DCI
13 14AM00TBAS for Base Adapter 1.27
14 14AM00T14M for NexusEFI T6 Lotus
15 14AM00TB02 for Magneti Marelli BDM insert
16 14AM00TB01 for Siemens BDM insert
17 14AM00TB03 EDC7 BDM insert
18 14AM00T18M for Magneti Marelli MPC/SPC56xx
19 14AM00T13M for Nexus MPC5xx TRW ECU
20 VAG 1.6tdi – for Siemens-Continental PCR2.1
21 14AM00T15M for Toyota NEC76F-20
22 14AM00T16M for Toyota NEC76F-26
Attention
No PCB in this package!
LED works for 12V.Once you connect with probe,then you disconnect 12V battery for LED,it will works.The probe pin is adjustable.
This item weight is 700g, but has volume weight 1200g.Please understand it.
package listing
as the pictures show.
BDM FRAME with Adapters Full Set
1. BDM FRAME with Adapters Set made from hight quality Plexiglass.
2. BDM FRAME with Adapters Set can be used on ECU Chip Tuning Tool Such
As BDM100 programmer, CMD, Fgtech , Kess, Ktag…
3. BDM FRAME Fit Both Original FGTECH And Not 100% Original FGTECH
Top Reason to Get BDM FRAME
100% brand new.
Item size: like the picture show.
BDM Frame with Adapters Set for FGTECH BDM100 CMD etc.
This BDM FRAME with Adapters Set is made from high quality.
Plexiglass , it can be used on FGTech BDM100 CMD Ktag Kess V2 etc.
Please Note :This is only bdm frame, it use for ktag ECU programmer tool. if you want the ktag ecu tool, please tell us, this product don't include k-tag product.
How to Install the BDM Frame Full Set?
LED BDM FRAME
This LED BDM FRAME is best bracket For ECU Update/ECU Brush And Write/ECM Modified and programming / Probe holder / Dimsport aids. It is much better than the old bdm frame.
It is best used for KTAG, KESS, KTM100, FGTECH/BDM100/CMD/DIMSPORT ect… ECU Chip Tuning Tools.
Easy installation and operation, no hurt the ECU circuit board.
Function
For Car rush,modify,programming bracket stand.
Fits for ECU brush&write,ecu modified&programming.
Probe holder,dimsport assistant.
Material
Aluminum alloy stand
Arcylic board, mesh assistant
No PCB Adapters inside package!!! LED works for 12V. Once you connect with probe,then you disconnect 12V battery for LED, it will works.The probe pin is adjustable.
22pcs BDM adapters Features
Adapter width: ~60mm width for original BDM Probe, not for low quality plastic with 40mm width.
Adapter thickness: 2mm
Adapter colour: Green
Package includes
1 14AM00T01M for Bosch
2 14AM00T02M for Dlphi DCM
3 14AM00T03M for Bootloader ST10xx
4 14P600KT04 for Tricore EDC/MED17
5 14AM00T05M for Marelli MPC55xx JTAG
6 14AM00T06M for Dlphi MPC55xx JTAG
7 14AM00T07M for Denso CN1 Boot
8 14AM00T08M for Denso CN2 Boot
9 14AM00T09M for Denso CN3 Boot
10 14AM00T10M for Denso CN1 AUD
11 14AM00T11M for Denso CN2 AUD
12 14AM00T00M for Dlphi DCI
13 14AM00TBAS for Base Adapter 1.27
14 14AM00T14M for NexusEFI T6 Lotus
15 14AM00TB02 for Magneti Marelli BDM insert
16 14AM00TB01 for Siemens BDM insert
17 14AM00TB03 EDC7 BDM insert
18 14AM00T18M for Magneti Marelli MPC/SPC56xx
19 14AM00T13M for Nexus MPC5xx TRW ECU
20 VAG 1.6tdi – for Siemens-Continental PCR2.1
21 14AM00T15M for Toyota NEC76F-20
22 14AM00T16M for Toyota NEC76F-26
Attention
No PCB in this package!
LED works for 12V.Once you connect with probe,then you disconnect 12V battery for LED,it will works.The probe pin is adjustable.
This item weight is 700g, but has volume weight 1200g.Please understand it.
package listing
as the pictures show.