2021 Newest FNR 4 In 1 FNR Key Prog 4 in 1 For Renault/For Nissan/for Ford Car Key Programmer with USB Dongle Free Shipping
Description:
FNR Key Prog 4-in-1 Key Prog for FD/RE/NIS
Key Prog+ for Refor Key Prog+ for Nis for Key Prog+ for FD Incode Calculator
Very simple and user-friendly soft ware interface, You do not need any PIN codes or access to for Re.net
You can program up to 4 blank keys/cards, Automatic remote control unit programming
Soft ware Version:
For FD Key Prog: 1.1.2
for ReKey Prog: 2.3.1
for NisKey Prog: 2.3.1
For FD Incode Calculator: 1.0
Notice:
Language:English Only
Copy one,Can't be Updated
NOTE:ONLY FOR WINDOWS XP SYSTEM
Key Prog：
key programmer 1997-2011
key programmer is an affordable, high performance, PC to vehicle programming interface,working by obd2,supporting different for foCOM cars from 1997 to 2011.With the for key programmer,you can clear the keys and add new keys.
Model List：
Transit Connect (2007-2011)
Focus (2004-2011) non-prox
Fusion (2002-2011)
C-Max (2003-2010)
Cougar (1998-2002)
Fiesta (1998-2002)
Fiesta (2002-2008)
Focus (1998-2004)
KA (1998-2000)
KA (2000-2008)
for Mondeo (1998-2007)
Puma (1997-2001)
Transit (2000-2006)
Transit Connect (2002-2007)
For Re Key Prog：
key programming and pin code retrieval system!
For Re key prog ,allow you to add a blank key or card for many of NEW for Re and for Nis cars via OBD-2 socket. You DO NOT NEED any PIN code! Soft ware would program keys/cards AUTOMATICALLY. it is for Re and for Nis based vehicles using HITAG-2 keys/cards – with the 12 character pincode.
The programmer connects to the vehicle through the diagnostic connector, and with the PC soft ware supplied shows the true dealer code from the vehicles. Simply click on 'Program' and it will prompt you through the programming sequence for learning new keys/cards to the vehicle.
Naturally once the Pincode is retrieved you can also use it for any security/coding/replacement for Re body control UCH ECUs.
This functionality will require for Re Clip or DEC Superscan.This programmer is designed for pincode reading and key programming solution by OBD solution for Re.
Advantages:
Very simple and user-friendly soft ware interface
You do not need any PIN codes or access to Re .net
You can program up to 4 blank keys/cards
Automatic remote control unit programming
Models Covered：
Clio II
Laguna Ph1/Ph2
Espace Ph1/Ph2
Velsatis II Ph1/Ph2
MeganeII
ScenicII (<2007)
Kangoo Ph2
Kubistar
Master Ph1/Ph2
Movano
Interatar
TraficII
Vivaro
Primastar
MeganeII
scenicII (>2007)
For NisKey Prog：
This covers pincode reading / key programming on these car systems with a mechanical key (non proximity) to the present day.
for Nis Micra K12
for Nis Note :Additional Security Pincode reading / key programming for thefor Nis Micra K12 and for Nis.
Incode Calculator: incode Calculator for 6 or12 Character
Supportted Car Models: for CARS
With the incode/outcode calculator, No need for internet access – this soft ware does all the calculations for you, seamlessly in the background.
you can use the INCODE, it calculates to match PCM to PATS module when installing new or secondhand for diesel pumps (INCODE calculator can be used without plugging into car). And You will need another diagnostic tool for IDS to do for pump matching.
Packing List:
1 x Key Prog Interface
1 x USB Dongle
1 x CD
Q&A:
Q1: I get “NO DONGLE FOUND” error, after install and plug the FNR soft ware and USB Dongle?
A1: You need install the crack file as well, please kindly check and confirm
Q2: When i install the soft ware FNR key prog 4-in-1, i follow the manual to install it, everything is right,
but i still get the error prompt “run-time error 8002invalid port number”, what is the problem?
A2: For this product, usb com port need to set up to com12.
Q3: When it shows error on the screen, I click OK, then I quit the soft ware page, why?
A3: You need to check the chip type, if it is compatible. If yes, that means this tool can not do your car.
