Upgrade Video
LAUNCH X431 CR3001 obd2 professional automotive scanner OBDII Code Reader Car Diagnostic tools engine off free update pk elm327
Did you meet these problems with your car?
1.Engine Shut off Solenoid? You need CR3001!
2.Injector Circuit Open? You need CR3001!
3.Intake Air Temperature too high? You need CR3001!
……
Need more than $150 for those problems?
TOOooooo Expensive!!!
Cr3001 read & erase codes ,fix your car problems so easy!
You are the professinal for your car.
CR3001 enhanced Mode 6 test ,Help you figure out the problem:
CR3001 Support Engine full OBDII/EOBD diagnostic functions and support obd2 protocols car ,such as:
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
Dose it Check with Engine-the heart of My car?
Engine Check including:
Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability
Turn Off ”Check Engine” Light
Parts might cause your check engine light on include:
1. Gas Cap 2. Oxygen Sensor 3. Air Fuel Ratio Sensor 4. Mass Air Flow Sensor 5. Ignition Coils 6. Spark Plug Wires 7. Spark Plugs 8. Thermostat 9. EGR Valve 10. Evaporatative Emission Canister Purge Valve(EVAP) 11. Catalytic Converter.
If the engine light is not turned off in time
it will Cause Serious environmental pollution , Increased fuel consumption,Increased engine noise.Increased in temperature , ect
How to diagnostic my car with CR3001?
Does it support my car?
•American Car list:
Need standard obd2 , and release year from 2000-now
Chrysler, Ford, GM, Jeep, Lincoln, Buick, Cadillac, Chevrolet, Dodge, HM, ect…
•European car list:
Need standard obd2 , and release year from 2003-now
Mercedes Benz, Smart, Sprinter, BMW, Volkswagen, Skoda, Audi, Opel, Lamborghini, Porsche, Maybach, Ford, Land Rover, Jaguar, Aston Martin, Bentley, Rolls-Royce, Rover, Mini, Vauxhall, DR, Ferrari, Fiat, Abarth, Lancia, Alfa Romeo, Maserati, Bugatti, Peugeot, Citroen, Renault, Saab, Volvo, GM, GMSA, Dacia ,Seat, ect …
• Russian car list:
Need standard obd2 , andrelease year from 2012 -now
GAZ, VAZ, Lada, IZH, Paz, SeAZ, UAZ, ZAZ,ect….
•Japanese / Korean car list:
Need standard obd2 , and release year from 2006-now
Honda, Acura, Toyota, Scion, Lexus, Mazda, Nissan, Infiniti, Isuzu, Daihatsu, Suzuki, Mitsubishi, Subaru, Samsung, Daewoo, Ssangyong, Hyundai , Kia, ect …
•Chinese car list:
Need standard obd2 , and release year from 2009 -now
Great Wall, Huachen, Geely, DF Honda ,Lifan, ect …
Support 7 Languages:
English, French, Russian, Spanish, German, Italian and Portuguese.
How to update CR3001?
Guess you like:
