Car Central Lock Keyless Entry With Remote Controls Suitable For All 12V Car Remotely Unlocking Doors And Tunk With Central Control Device Universal
-
Remote Lock
-
Remote Unlock
-
Electric or pneumatic lock
-
Automatic Lock
-
Remote Open Trunk
-
Remote Search Car
-
Remote Window
-
Direction Light Flashing
-
Optional Horn Output
-
One-Key Learning
-
Led Indicator Light
Features:
Remotely lock and unlock your car.
Central door lock automatically.
Can be used in all kind of cars.
Easy to install and to detach.
The product is durable and portable.
The price is favourable.
Specification:
Control box size: 8.5 x 6 x 2.5cm (L x W x H)
2 Remote Controllers size: 5.5 x 2.8 x 1cm (L x W x H)
Distance: About 60 – 80 meters
Working Voltage: 12V
Remote Control Battery:CR2016 3V
Working Frequency: 433.92MHz
*Due to customs security and transportation restrictions, batteries cannot be placed in the package. This remote control uses button batteries and the buyer should bring it by himself. The battery model is CR2016, 3V. Each remote control needs to place 2 batteries, a total of 6V.
Internal working scheme for central control locking unit.(Figure A)
1.If the car is originally equipped with central-locking system and the driver's door has been installed with electric motor,the wiring can be made on the diagram below:(B.C)
(Figure B positive trigger wiring diagram)
(Figure C Negative trigger wiring diagram)
2.When the car is originally equipp-ed with central-locking system and the driver's door is instarled with only one switch,then a two wire actuator should be installed ,the wiring can be made based on the diagram below:(D)
(Figure D wiring diagram forpositive trigger installation)
3.When the car is originally equipped with central-locking system (including in the driver's door),the wiring can be made based on the diagram below:(E)
(Figure E wiring diagram for positive electric circuit installation)
4.When the car is originally equip-ped with pneumatic central-locking system, the wiring can be made based on the diagram below:(F)
(when wiring as per this diagram,please cut of the jumper at the main unit.the central-controlling time is 4 seconds):
(Figure F wiring diagram for pneumatic circuit installation)
1.This module is a negative trunk signal output, some cars are positive trunk, then it needs to add a relay to convert it into a positive trunk signal.
Feedback
1.Buyer's early confirmation will be highly appreciated after receiving the items.
2.Since your feedback is very important to our business development,we sincerely invite you to leave a positive feedback (Five Stars) for us if you are satisfied with our product and service.It will just take you 1 minute,but this 1 minute has the extremely vital significance to us.
3. If you have any questions, please contact me immediately, I will provide the best solution and solve the problem in time, thank you!