DIY Headlight Polishing Restoration Kits
Headlamp Clean Paste Systems Car Care Wash
Head Lamp Brightener Repair Paint Care
Packing List
2*P800 Sanding Discs
2*P1200 Sanding Discs
2*P2000 Sanding Discs
1*Orange Sponge Disc
2*40gm Polish Paste
2*3.0ml Protect Liquid
1*Mask tape(300*2cm)
1*Backer pad M10 thread
1*Adapter
1*White Sponge Disc
Features
Designed to restore clarity to headlight lenses that have become yellowed, cloudy, or hazy.
Real Pictures
How To Use
Three easy steps:sand, polish, and protect.
Easier than replacing an old headlight.
Comes with easy-to-use instructions.
Prepare: Clean the headlight lens with water.
Mask off the surrounding perimeter of the lens to avoid scratching the paint of the vehicle.
Step1. Sand
Wet the sanding disc and attach it to the backer pad. Note:Use the sand discs from coarse to fine:P800–>P1200–>P2000.
Not doing so will result in restoration failure.
Step2. Polish
Attach the orange sponge disc to the backer pad and apply the polish past. Polish the lens until the shine is restored to its original condition.
Note: For best results, use an electric buffer or polisher. If polishing by hand, polish with no less than 200 strokes in a circular, clockwise motion.
Step3. Protect(How to apply UV Protective Liquid )
Clean the headlight lens and make sure the lens is dry before the protection step.
Use the white sponge disc provided in the kit. Evenly apply the protect liquid on the surface of the lens. After apply it, stay for 10-15mins to let the liquid flow evenly itself.
Then dry it direct sunlight immediately (1 to 2 hours is suggested).
if not, dust and other dirt will adhere to protect liquid due to its viscosity, which will affect the brightness of the headlight.
Note:
Please must avoid any sunlight when apply the protect liquid on headlight (very important). After step 3, keep the lens dry. Do not wash the car for 24 hours
Step4. Remove the mask tape
After finishing all the steps, please remove the mask tape, otherwise the longer the time, the harder it is to remove and may leave traces
Feedback
Buyer Protection
1. Full refund or resend if you don’t receive your order.
2. Full or partial refund , if the item is not as described.
On-Time Delivery
1. Guaranteed the product will be shipped out within 3 days. Usually it will be sent out the next day after your payment.
2. Guaranteed the product will be delivered within 60 days. Usually it will be delivered in 2 ~ 5 weeks. (For Brazil, the guaranteed time is 90 days, and the estimated delivery time 5~8 weeks).
