Note :
1: It may be a bit hot under working for this camera, as it does not have protective case on the device , but please do not worry , we can promise it is normal and 100% safe.
2: Ensure sufficient electricity quantity for WiFi series products feature large power consumption. Be sure to remember that it should be used after full charge; the insufficient electricity quantity will lead to poor connection, failure on signal searching, frequent off-line and unstable video etc.
So, if you encounter the problem mentioned above, please charge the device and re-start it after charging. The step will solve all problems.
3:Never to watch videos by directly opening mobile software. Make sure that you’ve already connected the hot-spot of this WiFi product before opening the software. Otherwise, you will fail to watch videos normally.
This is a network camera.There is no distance limitation for you to view or record live videos after you complete the network configuration on your smartphone APP in the P2P mode. You can view or record live videos any where any time you want.
Features:
Real-time Audio & Video Recording
WiFi IP Network Function
Support Smartphone Tablet APP Remote View and Control
90/120 degree Lens View Angle
Support Motion Detective Recording
Support 128GB Micro SD Card in Max (SD Card Not Included )
Circular Storage
Built- in Battery Capacity
About 2 hours Battery Operating Life Time
Support recording and charging at the same time
Parameters:
Video Format: avi
Lens View Angle: 90 degree/120 degree
Microphone: Built-in
Memory: Support 128GB Micro Card in Max
Min. illumination: 0.1 Lux
Operating Battery Life Time: 2 hours
Storage Temperature: -20-80 degree centigrade
Operating Temperature: -10-60 degree centigrade
Operation Humidity: 15-85%RH
Memory Card Type: TF card
Smartphone Operating System: iPhone iPad or Android
Battery Charging Voltage: DC 5V
1) .Install by scanning the QR code:(Figure 1)，entering download page(Figure 2)。Download the software according to the system selection of the phone.(After scanning the QR code, download by selecting the APP in the domestic version or overseas version according to the requirement)
2) .Android phone Search“ LOOKCAM” in Google App market to download and install it.
Apple phone Search“ LOOKCAM” in App Store to download and install it.
Addition of AP Hot Spots
Enter the phone WIFI settings, find the camera AP HotSpots account (device UID number) and connect. as the picture shows
After connecting the device UID as shown below, open the phone app (LOOKCAM) .
Router mode Connection (Remote viewing)
When you can watch the video with hotSpot, please go back to the previous level and enter the interface as shown.
Click the Settings icon → WiFi Connection Configuration → Find WiFi → Enter Password → Click OK to restart the camera. (After camera connet to router, refresh the page, waiting for about 40 seconds and the camera status will become online.)
